Kystar HD 2560×1536@60Hz LED Multi-window Video Wall Processor for LED Video Wall Supports Three-image Splicing Processor

• 1x3 VIDEO WALL mode: Separates one of video sources to 3 LED displays to create a single larger image.1x3 SEAMLESS SWITCHING: distributes any one of sources to either 3 LED displays simultaneously, or to 1 LED display into 3 parts forming 1x3 Video Wall
• The unit can not only display 3 windows on a screen, but control 3 LED screens simultaneously as well, each of which can display independently or be combined into a complete image.
• Support user-defined 2.6 mega-pixel output.Max. load of 2560×1536@60Hz in mosaic mode.Support 4K UHD signal processing
• Free 3-image layout, enabling easy central control of the main and side stage screens,Customizable for different images combination

• Support 1xHDMI 1xDVI 2xVGA 2xCVBS SDI×1 inputs and expansion 1xslot.The expansion slot DVI standard is 2 road ,it also can be optional as HDMI 1.4a,IP, SDI as well as DVI, HDMI1.3, VGA and CVBS

Description:

Support view real-time input and output signals by software.Support multi-image and output monitoring preview.

Overlay of multi-group editable and global image-texts and captions.

Seamless switching of signal and mode, with over 10 transition special effects.Support image transparency adjustment and edge feathering.

Support hot backup of multi-level input signals and multi-machine synchronous cascade outputs.

Support luma key.

Q and A:

Q1: Please give a brief introduction of the connection method of graphics, splicer, transmitting card, receiving the card and LED.
A: Connect graphics DVI (VGA) output port with splicer DVI-in (VGA-IN) input-output splicer DVI-out to transmitting card connect transmitting card with terminal receiving card of the back screen by network cable connect receiving the card with each screen body with control and cover whole screen by the cascade.

Q2: What is output resolution?
A: Output resolution is pixel mode output by the single port of splicer and the largest control range of splicer output Regular resolutions are: 1024*768, 1280*1024, 1600*1200 and 1920*1080, which are set with the same resolution mode of transmitting card.

Q3: What are the reasons for the failure of serial connection with the application of serial splicing processor?
A: Possible reasons are as follows:
① Wrong selection of COM port
Just click "confirm" and re-click "opening serial port" key
② Occupation of serial port, two or more software windows are not allowed to be open simultaneously
③ Failure of serial port line connection or damage otothe line
④ Damage of COM drive of the board or serial port

Q4: What is administrator password set in PC software?
A: No password, just a click is ok

Q5:How many sending cards can be installed to the video processor?
A: Up to two sending cards can be installed.