JCT high speed paint mixer

Specifications Paint production line

1.High Speed Dispersion Machine.

2.Dispersing Mixer.

3.Butterfly machine.

4.Homogenizer.

   High Speed Dispersion Machine    1.Specifications 1.Multifunctioinal dispersion machine
2.Vacuum/high pressure
3.High speed
4.Frequency control
5.ISO9001,ISO14001,CE   2.Introduction Dispersion machine is a powerful and efficient multi-function mixer, which can be widely used in adhesives, cosmetics, chemical products, batteries, food, pharmaceutical and plastics industries and other industries. Its frequency control, can meet a variety of process requirements. Strong disperser kettle has three different types of mixers, one in the kettle body runs around the axis, the other two rotate around its own axis in the different high speed. Material in the kettle crashes intricately and strongly sheared and rubbed.    3.Technical    Parameter

Model	Cylinder volume (L)			motor power        (KW)			Stirring speed (rpm)			Remarks
	Full volume	Feeding amount	Low speed		High-speed	Low speed		High-speed
QF-5	5	3	0.75		0.75*2	27		0-1500	Data in this table for reference, the actual data according  to specific process requirements, material viscosity,  and other design.
QF-20	20	12	1.1		1.11.5*2	27		0-1500
QF-50	50	30	1.5-3		2.2-4*2	27		0-1500
QF-100	100	60	2.2-4		4-5.5*2	27		0-1500
QF-200	200	120	3-5.5		5.5-11*2	27		0-1500
QF-300	300	180	5.5-11		7.5-15*2	27		0-1500
QF-500	500	300	7.5-15		15-22*2	27		0-1500
QF-1000	1000	600	15-22		22-37*2	27		0-1500
QF-1500	1500	900	18.5-22		30-37*2	27		0-1500
QF-2000	2000	1200	18.5-30		30-45*2	23		0-1000
QF-3000	3000	1800	30-37		37_55*2	23		0-1000
QF-4000	4000	2400	37-45		45_55*2	23		0-1000
1, Lifting way: hydraulic lift
2, According to the need for heating and cooling;
3, Pressure range:-0.1-0.3MPa;
4, Speed Mode: Frequency Control.

    4.Character: 1.The Planetary & dispersion machine is designed base on the planetary mixer and the dispersion machine. The machine is designed for mixing, vulcanization, nitration, sulfonation, hydrogenation, dehydration in viscous fluid.   2.The 1st motor drive the planetary blades group.There are 2 blades rotate on its own axis,besides the 2 blades  make planetary motion(revolution)  on the center axis of the machine. The 2nd motor drive a high speed shaft,  with butterfly and dispersion plates. In these 3 way of motion the material will be fine mixed and homogenized.   3.The planetary & dispersion machine will use thickness board so as to resistant the vacuum & high temperature. 4.There is a double layer jacket type movable vessels. The heat transfer media can be chosen by thermal oil, water or steam.The material mixing in the movable vessel, when it finished push it out.   5.The discharging mode are:YLJ series hydraulic discharging machine or ball valve.  6.There are variety of equipments can be installed such as: stroke control,safety control, measurement,  temperature Pt-Rh sensor, etc. The motor capacity will be selected according to the viscosity of the material. Other issues will be designed according to the best solution.                                       5.Contact    Information                         The JCT machinery -- JCT Dispersing! JCT-- your best choice!