Injection Molding Machine Ceramic Band Heater (DT-B033)

Injection Molding Machine Ceramic Band Heater(DT-B033)

Introduction:

We specialize in kinds of band heaters such as common ceramic band heaters, ceramica band heaters with air cooling, mica band heater, cast aluminum band heater and thermo blanket for plastics extrusion and injection molding applications!
Ceramic band heaters from Detai provide long life and use less wattage (because of insulation) in plastics extrusion and injection molding applications. These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.

Advantages:

1. Lower Operating Cost- Because of superior insulation, less heat escapes to the air and less wattage is required to maintain barrel temperature. Also the heater is safer because the external surface is much cooler.

2. Operator Comfort- With the majority of the heat going directly to your process, the ceramic band heater gives off significantly less heat to ambient air than a mica band heater.

3. Longer Heater Life- because all materials used are rated to operate at very high temperatures.

4. Higher Operating Temperatures

5. Flexible- easy to install and remove

6. Dual Heat Transfer- Heat is transferred through both radiation and conduction so a near perfect fit is not required as with other heaters, such as mica heaters.

Widely Applications:
1. Mainly applied to extrusion, casting and undershoot type mechanical. Operating temperatures up to 550 ° C, maximum surface load 8W/cm2.

2. Characteristic is fast heating, high thermal efficiency, Significant energy saving (reduce energy consumption by 30%), high-temperature creep resistant, long life, high temperature resistance, insulation resistance, is the one of best electrical heater for the plastic extrusion machinery, plastic injection molding machinePlastic hollow mechanical, Plastic film blowing machine, chemical fiber machinery.
Applications:

1. Injection molding
2. Blow-molding
3. Plastic extrusion
4. Container, pipe, or tank heating
5. Process applications

When sending a inquiry, please specify

1. Diameter and height
2. Power and voltage
3. Single type or double type
4. Product Model number
5. Non-standard type, please show us a drawing or photo

Dear customer, this isAngela, the customer service of Detai Electronical Co., LTD, We are professional manufacturer in heating element line with 18 years advanced technology and experience. Welcome to the inquiry. We will reply you within 8 hours, Thank you. Happy day.