Industrial and commercial strength polyurea flooring

Industrial polyurea flooring ddvantageous physical and chemical properties, such as tensile strength, elongation, flexibility, wear resistance, aging resistance, corrosion resistance, etc. Widely used in gymnasiums, chemical room floors, warehouse floors, distribution center floors.

UMS-AUPT Polyurea Floor Coating system is widely used in gymnasium, stadium, gymnasium and other sports floor, pavilion floor, Industrial Floor Coating and Polyurea Garage Floor Coating, chemical room floor, warehouse floor, distribution center floor, electronics, food, pharmaceutical, hospital, kindergarten, etc.

Performance of Polyaspartic Floor Coating

1. High elongation, high tensile strength, high elasticity, strong adhesion to concrete,

2. Polyaspartic Garage Floor Coating have good wear resistance, no blistering, no falling off.

3. Excellent UV resistance, strong resistance to stone and sand impact.

3. Has excellent resistance to freezing and thawing and aging resistance.

4. Simple construction, manual brushing, roller coating and high pressure airless spraying. VOC emissions during construction are extremely low.

Construction process

1. The base surface is cleaned to remove stagnant water from the uneven surface.

2. Brush the primer T9302, mix and mix in proportion, and brush twice according to the surface condition and technical requirements to reach a certain thickness. Run out in 30min

3. Brush the waterproof coating T109, mix and mix in proportion, and use up within 30-60min.

4. Brush the top coat T209, mix and mix in proportion, and use up within 30-60 minutes.

Garage Floor Coating Polyurea waterproofing project - UMS-AUPT waterproof coating use method

T9302 high permeability epoxy primer: 0.3, kg /m²   waterproof coating A: curing agent B = 1:1

T109 middle coating: 0.5kg/m²       waterproof coating A: curing agent B = 1:1

T209 high wear-resistant finish: 0.2kg/m²     waterproof coating A: curing agent B = 1:1