Huawei s5700 series switch S5700-28C-SI gigabit ethernet switch
Huawei s5700 series switch S5700-28C-SI gigabit ethernet switch
Huawei s5700 series switch S5700-28C-SI gigabit ethernet switch
Huawei s5700 series switch S5700-28C-SI gigabit ethernet switch

1 / 2

Huawei s5700 series switch S5700-28C-SI gigabit ethernet switch

Get Latest Price
Send Inquiry
Model No. : S5700-28C-SI
Brand Name : Huawei

Product description

Huawei s5700 series switch S5700-28C-SI gigabit ethernet switch Product Description           The S5700-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides a large switching capacity, high-density GE interfaces, and 10GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities, the S5700-SI is applicable to various scenarios. For example, it can be used as an access or aggregation switch on campus networks or an access switch in data centers. The S5700-SI integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers' OAM cost and help enterprise customers build a next-generation IT network. Features   Powerful support for services
• The S5700-SI supports IGMP v1/v2/v3 snooping, IGMP filter, IGMP fast leave, and IGMP proxy. The S5700-SI supports wire-speed replication of multicast packets between VLANs, multicast load balancing among member interfaces of a trunk, and controllable multicast, meeting requirements for IPTV and other multicast services.
Comprehensive reliability mechanisms
• Besides STP, RSTP, and MSTP, the S5700-SI supports enhanced Ethernet reliability technologies such as Smart Link and RRPP (Rapid Ring Protection Protocol), which implement millisecond-level protection switchover and ensure network reliability. It also provides Smart Link multi-instance and RRPP multiinstance to implement load balancing among links, optimizing bandwidth usage.   •The S5700-SI supports the Smart Ethernet Protection (SEP) protocol, a ring network protocol applied to the link layer on an Ethernet network. SEP can be used on open ring networks and can be deployed on upper-layer aggregation devices to provide fast switchover, ensuring non-stop transmission of services. SEP features simplicity, high reliability, fast switchover, easy maintenance, and flexible topology, facilitating network planning and management.
• The S5700-SI supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a Ring Automatic Protection Switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX.   Well-designed QoS policies and security mechanisms
• The S5700-SI implements complex traffic classification based on packet information such as the 5-tuple, IP precedence, ToS, DSCP, IP protocol type, ICMP type, TCP/UDP port number, VLAN ID, Ethernet protocol type. ACLs can be applied to inbound or outbound direction on an interface. The S5700-SI supports a flow-based two-rate three-color CAR. Each port supports eight priority queues and multiple queue scheduling algorithms such as WRR, DRR, SP, WRR+SP, and DRR+SP. All of these ensure the quality of voice, video, and data services. The S5700-SI supports 802.1x authentication, MAC address authentication, and combined authentication on a per port basis, as well as Portal authentication on a per VLANIF interface basis.
• The S5700-SI provides multiple security measures to defend against Denial of Service (DoS) attacks,and attacks against networks or users. DoS attack types include SYN Flood attacks, Land attacks, Smurf attacks, and ICMP Flood attacks. Attacks to networks refer to STP BPDU/root attacks. Attacks to users include bogus DHCP server attacks, man-in-the-middle attacks, IP/MAC spoofing attacks, DHCP request flood attacks. DoS attacks that change the CHADDR field in DHCP packets are also attacks against users.
• The S5700-SI supports DHCP snooping, which discards invalid packets that do not match any binding entries, such as ARP spoofing packets and IP spoofing packets. This prevents man-in-the-middle attacks to campus networks that hackers initiate by using ARP packets. The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.
• The S5700-SI supports strict ARP learning, which prevents ARP spoofing attacks that will exhaust ARP entries. It also provides IP source check to prevent DoS attacks caused by MAC address spoofing, IP address spoofing, and MAC/IP spoofing.
• The S5700-SI supports centralized MAC address authentication, 802.1x authentication, and NAC. It authenticates users based on statically or dynamically bound user information such as the user name,IP address, MAC address, VLAN ID, access interface, and flag indicating whether antivirus software is installed. VLANs, QoS policies, and ACLs can be applied to users dynamically.
• The S5700-SI can limit the number of MAC addresses learned on an interface to prevent attackers from exhausting MAC address entries by using bogus source MAC addresses. This function minimizes packet flooding that occurs when MAC addresses of users cannot be found in the MAC address table.
Easy deployment and maintenance free
• The S5700-SI supports automatic configuration, plug-and-play, deployment using a USB flash drive, and batch remote upgrade. These capabilities simplify device management and maintenance and reduce maintenance costs. The S5700-SI supports SNMP v1/v2c/v3 and provides flexible methods for managing devices. Users can manage the S5700-SI using the CLI and Web NMS. The NQA function helps users with network planning and upgrading. In addition, the S5700-SI supports NTP, SSH v2, HWTACACS+, RMON, log hosts, and port-based traffic statistics.   • EasyDeploy: The Commander collects information about the topology of the client connecting to the Commander and saves client startup information based on the topology. The client can be replaced without configuration. Configuration and scripts can be delivered to the client in batches. In addition, the configuration delivery result can be queried. The Commander can collect and display power consumption on the entire network.
• The S5700-SI supports GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to reduce manual configuration workloads of network administrators and to ensure correct VLAN configuration. In a complex network topology, GVRP simplifies VLAN configuration and reduces network communication faults caused by incorrect VLAN configuration.
• The S5700-SI supports MUX VLAN. MUX VLAN isolates Layer 2 traffic between interfaces in a VLAN. Interfaces in a subordinate separate VLAN can communicate with ports in the principal VLAN but cannot communicate with each other. MUX VLAN is usually used on an enterprise intranet to isolate user interfaces from each other but allow them to communicate with server interfaces. This function prevents communication between network devices connected to certain interfaces or interface groups but allows the devices to communicate with the default gateway.   PoE function
• The S5700-SI PWR can use PoE power supplies with different power levels to provide -48V DC power for Powered Devices (PDs) such as IP phones, WLAN APs, and Bluetooth APs. In its role as Power Sourcing Equipment (PSE), the S5700-SI PWR complies with IEEE 802.3af and 802.3at (PoE+) and can work with PDs that are incompatible with 802.3af or 802.3at. Each port provides a maximum of 30 W power, complying with IEEE 802.3at. The PoE+ function increases the maximum power of each port and implements intelligent power management for high-power consumption applications. This facilitate the use of PDs. PoE ports can work in power-saving mode. The S5700-SI PWR provides improved PoE solutions. Users can configure whether and when a PoE port supplies power.
High scalability
• The S5700-SI supports intelligent stacking (iStack). Multiple S5700-SI can be connected with stack cables to set up a stack, which functions as a virtual switch. A stack consists of a master switch, a backup switch, and several slave switches. The backup switch takes over services when the master switch fails, reducing service interruption time. Stacks support intelligent upgrade so that users do not need to change the software version of a switch when adding it to a stack. The iStack function allows users to connect multiple switches with stack cables to expand system capacity. These switches can be managed using a single IP address, which greatly reduces the costs of system expansion, operation, and maintenance. Compared with traditional networking technologies, iStack has advantages in scalability,reliability, and system architecture.
Various IPv6 features
• The S5700-SI supports IPv4/IPv6 dual stack and can migrate from an IPv4 network to an IPv6 network.S5700-SI hardware supports IPv4/IPv6 dual stack, IPv6 over IPv4 tunnels (including manual tunnels, 6to4 tunnels, and ISATAP tunnels), and Layer 3 line-speed forwarding. The S5700 can be deployed on IPv4 networks, IPv6 networks, or networks that run both IPv4 and IPv6. This makes networking flexible and enables easy migration from IPv4 to IPv6. Specification  
Item S5700-24TP-SI/ 
S5700-24TP-PWR-SI
S5700-28C-SI/
S5700-28CPWR-SI
S5700-26X-SI-12S-AC S5700-48TP-SI/
S5700-48TP-PWR-SI
S5700-52C-SI/
S5700-52C-PWR-SI
Fixed port

24×10/100/1000Base-T ports, 4 of which are dual-purpose 10/100/1000 or SFP

12×10/100/1000Base-T,12×100/1000Base-X, 2×10GE SFP+ 48×10/100/1000Base-T ports, 4 of which are dual-purpose 10/100/1000 or SFP 48×10/100/1000Base-T
Extended slot

The S5700TP provides one extended slot for a stack card

The S5700-28C and S5700-52C provide two extended slots, one for an uplink subcard and the other for a stack card.

MAC address table

IEEE 802.1d compliance

16 K MAC address entries

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

Reliability

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

ERPS(G.8032)

STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)

BPDU protection, root protection, and loop protection

IP routing

Static route, RIPv1, RIPv2, RIPng, ECMP

IPv6 features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

MLD v1/v2 snooping

6to4 tunnel, ISATAP tunnel, and manually configured tunnel

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source

MAC address, destination MAC address, source

IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

802.1x authentication, MAC address authentication, and combined authentication on a per port basis

Portal authentication on a per VLANIF interface basis

Management and maintenance

Stacking (not supported by S5700-26X-SI-12S-AC)

MAC Forced Forwarding (MFF)

Virtual cable test

SNMP v1/v2c/v3

RMON

Web-based NMS

System logs and alarms of different levels

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)
Supports VCMP (Similar to VTP)
Operating environment

Operating temperature: 0OC–50OC

Relative humidity: 5%–95% (non-condensing)

Input voltage

AC:

Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz

DC:

Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC

Note: PoE-support switches do not use DC power supplies.

Dimensions (W x D x H)

S5700-24TP-SI: 442 x 220 x 43.6 mm

S5700-26X-SI-12S-AC: 442 x 310 x 43.6 mm

Others: 442 x 420 x 43.6 mm

Power consumption

Non-PoE model: < 40 W

PoE model: < 455 W (PoE: 370 W)

Non-PoE model: <56W

PoE model: <836W (PoE: 740W)

<42.3W

Non-PoE model: < 64 W PoE model: < 907 W (PoE: 740 W)

Non-PoE model: <78W PoE model: <917W (PoE: 740W)

  Ordering Information  
Product Description
S5700-24TP-PWR-SI(24x Ethernet 10/100/1000 PoE+ ports, 4 of which are dual-purpose 10/100/1000 or SFP,AC 110/220V)
S5700-24TP-SI-AC(24x Ethernet 10/100/1000 ports, 4 of which are dual-purpose 10/100/1000 or SFP,AC 110/220V)
S5700-24TP-SI-DC(24x Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,DC -48V)
S5700-28C-SI(24x Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP, with 1 interface slot, DC -48V or AC 110/220V)
S5700-28C-PWR-SI(24xEthernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP, with 1 interface slot, AC 110/220V)
S5700-48TP-SI-AC(48xEthernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,AC 110/220V)
S5700-48TP-SI-DC(48x Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,DC -48V)
S5700-48TP-PWR-SI(48x Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP, AC 110/220V)
S5700-52C-SI(48x Ethernet 10/100/1000 ports,with 1 interface slot, DC -48V or AC 110/220V)
S5700-52C-PWR-SI(48x Ethernet 10/100/1000 PoE+ ports,with 1 interface slot, AC 110/220V)
S5700-26X-SI-12S-AC(12x Ethernet 10/100/1000 ports,12x Gig SFP,2x10 Gig SFP+,AC 110/220V)
4xGig SFP interface card(including 4xGig SFP optical interface, extend channel card)
2x10GE SFP+ interface card
4x10GE SFP+ interface card(including 4x10GE SFP+ interface, extend channel card)
Ethernet Stack Interface Card(including stack sard,100cm stack cable)
Ethernet Stack Interface Card(including stack card,300cm stack cable)
150W AC Power Module
150W DC Power Module
500W AC PoE Power Module
RPS1800 Redundant Power System
  Packaging & Shipping   Trade terms: FOB,CIF,CFR,etc
Price Terms: L/C,D/P,T/T,Western Union,PAYPAL
Payment Terms: T/T in advance
MOQ: 1 pcs
FOB Price:US $1 - 1,000 / Piece
Port: Shanghai
Lead time: Within 5 working days after receipt payment.
Shipment: Express, Air, Sea
Supply capability: 200 Piece/Pieces per Week
Sample availability: Yes( not free)
Package information: carton package with Huawei original package Company Information   COMBASST INDUSTRY DEVELOPMENT CO., LTD , which provides main services in terms of broadband communications and information technology industries, is a research and development, production, sales, service integration, high-tech enterprises. Our products mainly cover the optical signal transmission and access, signal transmission and access, photoelectric signal conversion and photoelectric signal and so on.   We are now the agent of well-known international brands such as HUAWEI, ZTE, CISCO, ZYXEL, Grandstream, etc. Our customer include major national telecom carriers, as well as radio and television, electricity, mining and other industry professional network users; We have already established a long-term friendly and cooperative relations with them. In addition, the company has been actively expanding into foreign markets. The products are exported to Europe, America, Southeast Asia, the Middle East as well as Japan, Korea and other neighboring countries.
We will constantly improve our service and quality to create a win-win situation.
Please contact us to know details.   COMBASST INDUSTRY DEVELOPMENT CO., LTD
Address: Room 110,No.389 JinWan Road, ShangHai , China
Tel:0086-21-51758132
Fax: 0086-21-58714662
Attn: Amber Wang
Skype: amber wang
www.combasst.com Our Services   • We can provide detail documents and remote help for device installation and configuration.
• Warranty: 1 year. ( After the quality guarantee period began to charge appropriate maintenance service fee.)
• Our company promises goods enjoy full return due to quality problem since goods delivered within 7 days or 15 days , returned goods must keep original state and it’s accessories are complete.  
Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628