HXCV40-105-F75 Micro Air Motor

 Compact air motor

2. Product features: 

 Compact air motors are mainly low-power vane air motors , with output power ranging from tens of watts to hundreds of watts, and rotational speeds ranging from several to several thousand revolutions. The compact air motor is mainly composed of a vane air motor and a planetary reduction mechanism. The planetary reduction mechanism is a built-in integrated design and is closely connected with the motor part. Compared with the traditional pneumatic deceleration motor, its structure is more compact and the space layout is more delicate, which reduces the volume and weight change brought by the additional deceleration mechanism to the motor as a whole. Micro air motors are mainly used in conditions that require low motor speed and high torque. It is small in size and light in weight, and is widely used in various electrical automation equipment as a driving source. Such as robotic arms, conveying equipment, winding equipment, packaging machinery, medical equipment, etc. The miniature air motor has higher requirements on machining accuracy and assembly process. Compared with the general air gear motor, its performance is more superior.

3. Technical parameters

5. Matters needing attention

(1) air motor shall be dry, clean, lubricated through the compressed air, an air filter must be installed in the gas system, the adjusted pressure valve, oil mist, i.e. FRL or FRL. The double and triple parts must be installed close to the air motor (within 0.5 meters).

(2) takes over the inner diameter not less than 6.5mm connecting passage to be completed inside the ventilation duct cleaning debris may occur before access heteroaryl air motor thereof, which may cause foreign matter from entering the air motor Ma Daka die.Continuous lubrication shall 

(3) when the air motor is running (after the lubricant mist atomized with the compressed air into the air motor), the lubrication will be reduced and less wear and corrosion of the air motor inside the motor part of the blade, extend the service life. The lubricant label is ISO-VG32

No. lubricator special oil or other lubricating oil of the same grade. The amount of lubrication is 2-3 drops per minute.