High Power WCDMA 2100MHz Cell Phone 3G Wireless Signal Amplifier

High Power WCDMA 2100MHz Cell Phone 3G Wireless Signal Amplifier  Product Description   Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction. Main Features High linearity PA; High system gain; Intelligent ALC technology; Full duplex and high isolation from uplink to downlink; Automatic Operation convenient operation; Integrated technique with reliable performance; Local and remote monitoring (optional) with automatic fault alarm &remote control; Weatherproof design for all-weather installation; Applications   To expand signal coverage of fill signal blind area where signal is weak or unavailable. Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc. Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc. It is mainly applicable to such case: The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than  70dBm; And can meet the requirement of antenna isolation to avoid self oscillation.   Technical Specifications      

Items		Testing Condition	Specification		Meno
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	1920 – 1980MHz	2110 - 2170MHz	Full band or sub band
Bandwidth		Nominal Band	5-25MHz		Can be configured in work band
Gain(dB)		Nominal Output Power-5dB	95±3
Output Power (dBm)		GSM modulating signal	37	43
ALC (dBm)		Input Signal add 20dB	Po≤±1
Noise Figure (dB)		Working in-band(Max. Gain)	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤2.0 (3.84MHz)
Time Delay (us)		Working in-band	≤5
EVM(%)		Working in-band	≤12.5
PCDE (dB)		Working in-band	≤35
ACLR(dBc)	±5MHz	Working in-band	≥-45
	±10MHz	Working in-band	≥-50
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm

                                                     Install information Company Information   Certifications   OEM Service Product range: GSM / CDMA / DCS / WCDMA / TETRA / LTE Wireless Full Band Repeater, Fiber Optic Repeater, Frequency Shifting Repeater, Digital / Analog Repeater, Trunk Amplifier

Support System	Frequency Range	Output Power
GSM900MHZ	890-915MHz/935-960MHz	2W/5W/10W/20W/30W/40W/50W/60W
DCS1800MHz	1710-1785MHz/1805-1880MHz	2W/5W/10W/20W/30W/40W/50W/60W
PCS1900MHz	1895-1910MHz/1975-1990MHz	2W/5W/10W/20W/30W/40W/50W/60W
GSM850MHz	824-849MHz/869-894MHz	2W/5W/10W/20W/30W/40W/50W/60W
CDMA450MHz	450-457.5MHz/460-467.5MHz	2W/5W/10W/20W/30W/40W/50W/60W
CDMA800MHz	824-849MHz/869-894MHz	2W/5W/10W/20W/30W/40W/50W/60W
CDMA1900MHz	1880-1890MHz/1960-1970MHz	2W/5W/10W/20W/30W/40W/50W/60W
UMTS850MHz	824-849MHz/869-894MHz	2W/5W/10W/20W/30W/40W/50W/60W
UMTS2100MHz	1920-1980MHz/2110-2170MHz	2W/5W/10W/20W/30W/40W/50W/60W
GSM900/1800MHZ	890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz	2W/5W/10W/20W/
GSM850/1900MHZ	824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz	2W/5W/10W/20W
GSM900/UMTS2100	890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz	2W/5W/10W/20W/

Our present manufacturing service: 1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA 2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS; 3. Tri-band repeater of GSM/DCS/WCDMA 4,Trunk Amplifier 5. All kind of Antenna/Splitter/Connector/Cable FAQ 1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.

3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.

4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area. Packaging & Shipping  

Packaging Detail	Standard Package  1) Signal Repeater (AC power cord EU standard/ US standard/ UK standard) 1PC  2) Installation kit 1PC  3) User manual 1PC
Delivery Detail shipping	10-15working days after received payment DHL, UPS, FEDEX, Air/Sea freight

  Contact information Anna Yao
Quanzhou Kingtone Optics & Electronics Technology Co.,Ltd Tel:  +86 595 228857992   Fax:  +86 595 22155502 Mobile:+86 15392188577; +86 13178207380   Whatsapp:+86 15392188577   
Skype: anna.yao696 Web: http://www.kingtone.cc    &   http://www.kingtone.net.cn Email:anna@kingtone.net.cn   &  sales02@kingtone.cc