High luminous flux aluminum LED panel lighting for signs backlit

Specifications aluminum LED panel lighting

100lm/w Luminous efficiency

IP67-3.5mm led AL.panel

good heat removal

RoHS,CE,3 years warranty

High luminous flux aluminum LED panel lighting High brightness type RX-ALF5050 Series LED aluminum panel. Mainly used for lighting and
signs. Especially suitable for metro, stations, airports, shopping malls and other high-end lighting and backlighting. You can also substitute the same size of the ceiling directly.    Features:
1. High intensity SMD5050 LED,Luminous efficiency of more than 110lm/w
2. Integrated waterproof design,safe and reliable,attractive appearance
3. High efficiency cooling, the relative temperature rise is less than 10°C
4. Ultra-thin, the thickness is less than 3.5mm
5. Can choose full color change, the need to adjust RGB drive
6. Lifetime is up to 50, 000 hours
China Patent No.: ZL200820131053,ZL200820132702 Aging test is more powerful,24 hours of continuous work,more than 3 years    

MODEL	Dimension	LED QTY	LED TYPE	Luminous flux	Power Input Voltage	Application scope
Economic ad-LED backlight aluminum panel lighting RX-ALF3528-33	30x30cm	81pcs	SMD3528	5500Lm	5.5W 12V	Medium brightness backlight various indoor and outdoor
	30x60cm	162pcs		1100Lm	11W 12V
	60x60cm	324pcs		2200Lm	22W 12V
Enhanced-LED Aluminum panel Lighting - more brightness RX-ALF5050-33	30x30cm	81pcs	TOP SMD5050	1500Lm	15W 12V	Various types of indoor and outdoor advertising backlight, shopping malls, railway stations, office lighting company based lighting
	30x60cm	162pcs		2650Lm	30W 12V
	60x60cm	324pcs		5800Lm	58W 12V
Super brightness-LED Aluminum panel Lighting - lighting in public places RX-ALF5050-25	30x30cm	144pcs	TOP SMD5050	2500Lm	25W 12V	Higher illumination for, stations, shopping malls and other public places, lighting
	30x60cm	288pcs		5000Lm	50W 12V
	60x60cm	576pcs		10000Lm	100W 12V

    Note:
Temperature Rise: Max +10°C/Relative environmental temperature
The above figures: white LED color temperature 6000-6500K, the test temperature is 25 °C, the input voltage DC12V, LED aluminum lamp input wire length 20cm. when used as a backlight lamp with a minimum spacing of 5cm.  The red side-line is the anode or Center positive for stock . Lifetime is up to 50, 000 hours (The average working temperature of 25°C) Safety Information
1.The LED aluminum panel itself and all its components may not be mechanically stressed.
2.Assembly must not damage or destroy conducting paths on the circuit board.
3.Installation of LED aluminum panel (with power supplies) needs to be made with regard to all
applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
4.Correct electrical polarity needs to be observed. Wrong polarity may destroy the LED panel.
5.Parallel connection is highly recommended as safe electrical operation mode.
6.Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload
and damage the LED ALU panel.
7.Please ensure that the power supply is of adapters power to operate the total load.
8.When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical
isolation points between strip and the mounting surface.
9.Pay attention to standard ESD precautions when installing the LED aluminum panel.
10.Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
11.Waterproof LED aluminum panel , please note waterproof wiring Department
Please be sure you choose right AC/DC power adaptor to drive LED aluminum panel. If you have
difficulty to buy such adaptor locally, please turn to us.