FXO FXS multiplexer for phone over E1 with FXO card

Name: FXO FXS multiplexer for phone over E1 with FXO card
Brand: Beijing Hongmen Weiye Information Technology Co., Ltd.
Rating: 4.0 (21 reviews)

Get Latest Price

Send Inquiry

Model No. :	HM-PE
Brand Name :	Humanity

9yrs

Beijing, Beijing, China

Visit The Store

Beijing Hongmen Weiye Information Technology Co., Ltd.

VISIT THE STORE

Product description

FXO FXS multiplexer for phone over E1 with FXO card HM-PE Humanity FXO FXS multiplexer for phone over E1 with FXO card is produced mainly for phone (FXS/FXO) transmission over E1. 4 slots can be with same or different functions optioanl for: low speed (2M) Ethernet, phone, RS232/RS485 data, 2/4EM. This multiplexer is mainly used in public security, military, water conservancy, electric power, oil field etc. Main Features 1U 19inch for cabinet installation Flexible services offered by 4 extra service slots Up to 30 FXO/FXS ports for the connection with PABX or PSTN Full alarm indicators E1 interface both with 75Ω and 120Ω Module power supply with anti-jamming ability toensure long life With RS232 hyper terminal network management

A: Power. 1-16 FXS/FXO can support dual power. B: E1 interface. (75 Ohm&120 Ohm) C: 4 extra slot optional for : Ethernet, FXS/FXO, RS232/RS485 data, V.35, 2/4EM. D: Console interface for network management. E: Dip SEL switch. The exra service overview can be found in the below table

Channel for slots Service	Available per extra service slot	Maximum by 4 extra service slots
Phone(FXO/FXS)/hotline	8channel	30channel
n*64kbps Ethernet	1channel	4channel
RS232/RS485	4channel	16channel
2 wire EM or 4 wire EM	2channel	8channel

Technical Specifications

Device Construct	1U 19 inches. Compact and good appearance
Main Feature	4 slots to offer customized services
E1	Fully comply with ITU-T G.702, G.823
	Bit rate: 2048Kbps
	Code: HDB3
	Connector: 75Ohm unbalance (BNC) 120Ohm balance (RJ45)
Phone (Hotline or FXO/FXS)	Maximum 30 channel phone can be offered
	Connector: RJ45
	Impedance: 200Ω+680Ω 0.1uF
	Frequency character: 300-3400Hz(-0.6-+3dB)
	Weighted noise: ≤-65dBmop
	Interface loop resistance: ≤1800Ω
Low speed Ethernet (optional)	Maximum 4 low speed Ethernet
	Connector: RJ45
	Bandwidth: NX64Kbps, N=1-30
	MAC address list capability: 1024
	MAC address list aging time: 5 minutes
	The minimum frame length: 64byte~2024byte
	VLAN: support VLAN transparent transmission
RS232 (optional)	Maximum 16 channel RS232
	Connector: RJ45
	Transmitting output voltage: ±15V
	Receiving input voltage: ±15V
	The maximum rate of transmitting and receiving: 38.4Kbps
RS485 (optional)	Maximum 16 channel RS485
	Connector: RJ45
	Receiver input sensitivity: maximum ±200mV
	Receiver output current, IO: ±10mA
	The maximum rate of transmitting and receiving: 38.4Kbps
V.35 (optional)	Connector: DCE
	Interface type: DB25
	Rate: N*64Kbps, N=1~30
EM phone (optional)	Maximum 2 channels per slot, 8 channels by 4 extra service slots
EM phone (optional)	2 wire EM or 4 wire EM configurable by DIP switch
Power	AC220V or DC48V option for more than 16 channel phone
	AC and DC dual power available for less than 16 channel phone
	Power consumption≤30W
Environment	Working temperature: 0 ~ 70°C
Environment	Relative humidity: ≤90%(25°C)
Dimensions	48326044mm

Accessories 1 pcs RJ45 for 120Ohm and 2 pcs BNC for 75Ohm 1~8 RJ45 plug for 1~30ch phone AC110V/220V power cord if AC is required 2 mounting brackets 1pc User Manual Application Diagram

More services available to be customized according to your requirements.

More Than 10 Years Professional Experience. We Are Always Here For You.