F/J Primed Casing Wood Trim Ceiling Wood Mouldings

F/J Primed Casing Wood Trim Ceiling wood Mouldings
1. Specification
1) Species: Radiata Pine/Chinese Fir/LVL(Eucalyptus)
2) Moisture content: 10-12%
The raw material prior to manufacture should be kiln dried to within the 10-12% moisture content range
To ensure stability through the successive manufacturing processes.
3) Specification: Accept customized size and profiles
Finger jointing is a popular process used for producing wood moldings, using mechanical
(and/or automated)equipment to produce long length mouldings and have all the defects removed.
4) Surface finish: Raw wood moulding profile + Thin gesso coat + water base primer (can be water proof)
Coating application would be applied equally on all edges and has a strong adhesion to the
Wood substrate throug testing. No visible defects like patching, open finger joints, bleed through, etc
After being coated/primed. Mouldings would stay straight and not have excessive bow or spring
2. Manufacturing process
1). Moulding preparation
The wood blanks are maufactured in mouling profiles.
2). Surface sand following moulding preparation, Machined(produced) with high speed planing equipment
To yield a premium finish timber moulding ready for priming with a gesso coating.
3). Priming-stage 1: Mouldings are spray-coated with the 1st application of thin gesso coating.
4). Intermediate sanding stage: Surface sand following priming stage 1
5). Mouldings are spray-coated with the 2st(and final) application of water base primer.
6). Final product check with light sand and buff to the surface, that is readily painted with quality topcoats
Packing&Loading
1. All mouldings to be packed in mini-bundles secured with tape, within the main pack structure.
2. Packs will be then strapped securely with poly strapping (to be confirmed by customer)
To secure for shipment.
3. All bottom packs are secured to a plywood pallet that allows containerisation and unloading.
Quality standards
1. Moisture content must be accurately tested with an electronic moisture meter.
2. All dimensions should be within the dimensional tolerances as specified on the order
3. Coating application would be applied equally on all edges and has a strong adhesion
To the wood substrate throug testing. No visible defects like patching, open finger joints,
Bleed through, etc, after being coated/primed.
4. Mouldings would stay straight and not have excessive bow or spring.