1 / 2
Model No. : | EUT-108 |
---|---|
Brand Name : | EDDYSUN |
Product description
Model | EUT-108w 8-channel digital ultrasonic flaw detector |
Type | Digital ultrasonic detector |
Technical Parameters | 1. Transmitted pulse: sharp pulse amplitude ≥500V, rise time of front edge tr≤15ns 2. Frequency range: 0.5 ~ 15MHz, adjustable between narrowband and broadband of hardware or according to customers’ requirements. There’re two special hardware/software narrowband filters in 2 ~ 4MHz / 4 ~ 6MHz designed for application on site. 3. Pulse repetition frequency (PRF): 25Hz~10KHz, adjustable among 25/50/100/200/500/1K/2K/5K/10KHz. The maximum PRF of each channel is 10KHz when each four channels work circularly. 4. Detection range: continuously tunable from 0 ~ 5000mm (longitudinal wave in steel), the minimum display range is 5mm 5. D-Delay (Pulse shift): -10 ~ 1000mm (longitudinal wave in steel) 6. P-Delay (Probe delay): 0 ~ 200 us 7. Material velocity: 1000 ~ 15000 m/s 8. Gain: 0 ~ 110 dB with step of 0.5/2/6dB 9. Fine tuning of gain: -2 ~ +6dB with step of 0.1dB 10. Attenuation error: not more than ±0.1dB for every 2dB 11. Vertical linear error: ≤3%, Horizontal linear error: ≤0.5% 12. Inspection sensitivity margin: ≥63dB 13. Reject: 0 ~ 80%, linear reject 14. Damping: 50/500Ω 15. Sampling rate: 200MHz 16. Optional measuring point: front edge or peak value 17. Gate: a/b/c/d four independent warning gates, besides the positive/negtive alarm functions, gate a is designed with the function of tracking and gate d with the function of bottom wave reject 18. Echo evaluation: optional modes such as sound path, horizontal distance, vertical distance, echo amplitude etc. 19. Storage: be able to store datas and parameters 20. Interface: network port, USB port, I/O port, ground port etc. 21. Power supply: AC power supply between 100 ~ 240 V 22. Other funntions: first echo tracking and various settings for anti-interference on the spot |
Application | EUT-108w can be extended to other multi-channel equipment whose channel number is a multiple of 4, such as 8/12/16/24/32 etc., so it’s appropriate for automatic or semi-automatic ultrasonic inspection on steel tubes, rods and ingots, especially for steel tube whose thickness is more than 100mm. By adjusting the frequency range, this equipment can be used for high-speed automatic inspection for small-bore thin wall tubes. |
Send your inquiry to this supplier