Model no.: | DT 800 / 800C / 800F |
Material: | ABS Plastic |
Capacity: | 800 ml(max 1000 ml) |
Function(optional): | Drop, Spray & Foam |
Sensor distance: | 6-12 cm |
Droplet(adjustable): | 0.6~0.8ml / 0.8~1.0ml / 1.0~1.2 ml |
Unit size: | 13.5 * 12.0 * 26.5 cm |
Unit weight: | 0.85 kg |
Power: | 4 pcs “C” batteries or AC 110 v ~ 220 v |
Battery life: | At least 100,000 Dispensing Cycles(DC) |
Features: 1. Patent of Modularization design, easy for application & maintenance with lower cost & labor. 2. Flexible nozzle design at drop, spray & foam options which suits for a variety of liquid or gel soap and disinfectant. 3. Bottle/disposable bag available. 4. Power consumption is very low, battery life reaches more than 100,000 cycles. 5. There is a device for protecting from stealing off. 6. Primary application: school, health care, institutions, hospitals, office, hotel, shopping mail, coffee bar, food factory etc. Operation: Refillable bottle: To fill dispenser, remove the lid and fill with liquid or gel. Disposable bag: To fill dispenser, fill with liquid or gel through the hole which is on the bag, then insert nozzle. Please fill the nozzle completely with liquid or gel (Press the nozzle & make air discharged) before installing the new bag in the dispenser to work, the drop or spray function could be more efficiency. Open front of box to install liquid bag. Pull the valve hose out and down, place the liquid bag in box on top of the control box, place the hose in the channel, make sure the upper collar is beneath the upper notch and the lower collar fits into the lower notch. Dispenses liquid or gel of viscosities ranging from 1,000-5,000 cps. To activate the dispenser, place hand under spout for approximately one second. Sensing range comes at factory setting of 4-8cm. The sensing range set by the factory is recommended for optimal performance. Window indicates when fill is required. The locked, hinged housing opens for re-filling only with the special key provided. Requires six (6) Alkaline “C” Cell batteries, 1.5V (not included). Green indicator light signals “IN USE”. Flashing red light signals “LOW BATTERY”. CE certified. Installation: Do not install in areas or direct sunlight, make sure there are not white surface or any other strong reflectors within 30cm below. Mount the dispenser to the wall by using the enclosed screws and wall plugs. Make sure the wall surface is cleaned and in good condition to ensure proper mating of the dispenser to the wall. Install six (6) Alkaline “C” Cell batteries, 1.5V into the battery chamber which is located on the back of control box, replace the control box by sliding down. Must be flush to bottom.
