[Discontinued] Japan FSM 60S Fujikura Fusion Splicing Machine

  [Discontinued]  FSM 60S Fujikura Fusion Splicing Machine Description The FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30 drop test.

The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.

New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Features Rugged construction providing shock, dust and moisture resistance Dual monitor position with automatic image orientation Automatic arc calibration and fiber identification User-selectable fiber clamping method sheath clamp or fiber holders Auto-start tube heater feature Color LCD display with anti-reflective coating for excellent visibility in bright sunlight Simultaneous battery charge and splicer operation Long life battery (up to 160 splice/heat cycles per charge) Detachable work table incorporated into the transit case Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet Green friendly - RoHS & WEEE compliant Specifications  

Applicable Fibers	Single-mode (ITU-T G.652), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)
Cladding Diameter	80µm to150µm
Coating Diameter	100µm to 1,000µm
Fiber Cleave Length	8 to 16mm with 250µm coating diameter, 16mm with 900µm coating diameter
Typical Average Splice Loss	0.02dB with SM, 0.01dB with MM,0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time	Typical 9 seconds with standard single-mode fiber
Arc Calibration Method	Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes	100 preset and user programmable modes
Splice Loss Estimate	Based upon dual camera core alignment data
Fiber Display	X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification	300X for single X or Y view, or 187X for X and Y view
Viewing Method	Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition	0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test	1.96 to 2.25N
Tube Heater	Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time	Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length	60mm, 40mm, micro
Splice/Heat Cycles with Battery	Typical 160 cycles with power save functions activated
Power Supply:	Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals	USB 1.1 (USB-B type) for PC communication. M ini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection	Maximum wind velocity of 15m/s. (34 mph)
Dimensions	136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Weight	2.3 kg (5.1 lbs) with AC adapter ADC-11; 2.7kg (5.9 lbs) with BTR-08 battery

  Standard Package: FSM-60S Fusion Splicer Kit Includes (with cleaver): a) Main body Model:FSM-60S - 1 pc;
b) Detachable AC Adapter & Battery charger Model: ADC-13 - 1 pc; 
c) AC power cord Model: ACC-XX - 1 pc; 
d) Spare electrode Model: ELCT2-20A -1pair;
e) Carrying case Model: CC-24-60S - 1pc
f) Instruction manual (English version) - 1pc
g) Video Instruction Manual, V-60S-E - 1pc
h) High precision fiber cleaver Model:CT-30A or CT-05A- 1 pc; 
i) Battery Pack Model: BTR-08 - 1pc
j) Battery charge cord Model: DCC-14 -1 pc 
k) USB cable: USB-01    1pc; 
l) J plate Model:JP-05 - 1pc; 
m) Sheath Clamp Model:CLAMP-S60A - 1pc.   Long life battery More Options Available: China Make Fusion Splicers: Company‘s Certificates:                  Shanghai Govo Telecom Co.,Ltd. Your reliable supplier and partner!