DEM041IL Two Phase Three Wire Energy Meter

Technical parameters:

• Model:DEM041IL
• Accuracy:Class 1
• Reference Voltage（V）:2×127 / 2×230
• Current specifications（A）:5（30）/10（60）/20（100）
• Starting current（A）:0.02/0.04/0.08
• Insulation performance:AC voltage 4kv for 1 minute，1.2/50us  waveform impulse voltage 6kv

*If you need different reference voltage or current specification，please advisory our sales personnel

• 35mmstandard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves.
•  Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
• Have two tariffs, and port of set the tariff, input control voltage 0-90 Vac, set up tariff F1, input control voltage 150-400 Vac, set up tariff F2, the tariff conversion is controlled by timer outside or similar equipment.
•  Standard configuration type of cycle display, cycle display is 5 seconds. It can display 6 data at most. Can select the data which displayed. (Please specified when ordering). The decimal median which displayed can choose set one or two. (Default
  two decimal, please specified when ordering).
•  Use memory that is not loss easy, the data can be kept forever after blackout.
• There are a polarity port of pulse output passive closed and a nonpolarity port of pulse output passive distant, the output rate is 10 or 100 imp/kWh (can select) Complying with standard IEC 62053-31 and DIN 43864.
•  Seven LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, and the tariff state just now.
•  Single direction two components measure two phase three wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
•  Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT (Product Configuration code is IN) and PT & CT (Product Configuration code is IP) for operation.
•  Standard configuration short terminals cover, may select extension terminals cover, in order to protect to use safety. (Product Configuration code is IM).