chipboard making machine/chipboard machine   Product Description Product Description                                                                                           Below is the particle board production line work flow chart   Tips:our factory can also product the different sizes of the particle board production line according to our customers' requirements.     Brief introduction of particle board production line                                 

1.Wood shavings preparation process                                                                    Raw material is reduced into qualified chips by the drum chipper,  then  the chips are transported to the chip bin, and then feed to the  knifering flaker by  which the chips are turned to flakes, then the  flake stored in wet flake bin. 2. Drying and sifting process                                                                                 The flakes are discharged from the wet flake bin which are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface dry wood shavings bin to be stored. 3.Glue spreading process                                                                                       After scaled, the core and surface flakes are to be effectively  and uniformly mixed  with qualified glue to achieve the uniform mixing and the sufficient sizing effect. 4.Paving and thermoforming process                                                                    The after sizing shavings are transported to the mechanical grading paving machines by the belt conveyor.and they are paved to the uniform flat slab. After a series of processes. such as pre-press, lengthwise saw, cross saw, accelerate conveyor, storing conveyor and loading conveyor,the rough boards are sent to the installed hoistingcages,then the rough boards are pressed by the hot press machine.  5. Post--processing process                                                                                  The thermofoming boards are conveyed to the panel turnover machien to become cool,then the boads are transported to the vertical and horizontal edge cutting machine by the cooling conveyor. 6.Sanding process                                                                                                 The boards are sanded, checked and stored .  PLC control is used in mat-forming section.

    Below is the main equipments of particle boardproduction line        One step:drum chipper  (  particle board production line )                                        Two step: ring flaker (particle board production line )                                           
  Three step:drying and sifting section triple channel dryer ( particle board production line )                                                Four step:vibrating screen (particle board production line)                                  

Equipment name	Vibrating screen(rectangular screen)
Vibrating screen floors	3
Physical size	1260*3000mm
Capacity	8m3/h
Electrical motor power	22kw

    Five step:sizing process                                                                                        glue spreader ( particle board production line )                                                       Six step:paving process  forming machine                                                            ( particle board production line )                                                                          

Equipment name	Mechanical classifying forming machine
Diamond roller number	32
Machine production capacity	2*25(m3/h)
The width of the paving slab	1280mm
the thickness of the paving slab	25~160mm
Vacuum chamber gas consumption	2*2500m3/h
paving motor power	4*2.2KW(2sets)
Bidirectional screw conveyor power	1.5kw*2sets
Metering belt motor power	1.5kw*2sets
Mixing roller motor power	1.1kw*2sets
Break up roller motor power	2.2kw*2sets
Equipment quantity	About 5*2=10t
Equipment elevation	1060mm

    Seven step:thermoforming process                                                                      hot press machine ( particle board production line )                                            

Model	Shengyang machinery
Boards direction	longitudinal
Layers	15
Layer spacing	200mm
Hot plate number	16
Hot plate size	2700×1500×100mm
Oil cylinder	6
Oil cylinder diameter	Φ320mm
Oil cylinder position	Overhead type
Accumulator flow	3000L/min
Low pressure pump’s pressure	≤3.5Mpa
Power	15Kw
High-pressure pump flow	about 63ML/R
High-pressure pump’s pressure	≤25Mpa
Power	22Kw
Medium pressure pump flow	about 160ML/R
Medium pressure pump’s pressure	≤15Mpa
Power	45Kw
Slab size	2580×1350mm
Quantity	about 90,800Kg
Control mode	Automatic pumping station
Frame style	Group frame
Steel thickness	40,30,20,12mm

 
  Eight step:cutting process                                                                                    horizontal and vertical trimming saw machine                                                      

Timber processing size	2440×1220mm
Saw web diameter	250~315 mm
Sawing plate thickness	3~50 mm
The main saw plate revolving speed	6500-7000 r/pm
Equipment dimension	8500×5500×1020 mm
Equipment quantity	7200Kg
Total motor power	43Kw
Remark:including lifting platform and automatic stocking mechanism.

    Nine step:sanding process                                                                                       sanding machine ( particle board production line )                                                     
  some pictures of particle board production line                                      
      Packaging & Shipping                                                                                    We will do our best for the packaging and shipping of the machines according to our cutomers requirements.       Our Services                                                                                                     Our engeneers are available to go to our customer's country to guide the installation and operation of the machine.      Company Information                                                                                       Linyi Lanshan Shengyang Wood-based Panel Machinery Factory

Linyi Lanshan Shengyang Wood-based Panel Machinery Factory,founded in 1996, is a professional manufacturer which developed and manufactured all kinds of man-made machinery and equipments.   Our main products are Fully automatic particle board production line,Melamine laminate hot press machine,Short cycle lamination hot press machine and variety of new high-end hot press machine,cold press,dryer, Planking machine,Saw machine...etc. full set wood-based panel production machinery and equipments.

    More                                                                                                                    

full automatic and semi-automatic  osb production line	melamine laminating plywood hot press machine film faced plywood press machine
plywood production line	Particle board and MDF short cycle melamine laminating hot press machine