Change-Over Return Line Hydraulic Filter Assembly

Change-over Return Line Oil Filter (SDRFLD) (Cast Version)

---cast /steel material

---up to 1300 L/min

---up to 25/40 bar

---equipped with a ball change-over valve

1. Technical Specifications

1.1 Filter Housing

Construction

Change-over Return Line Oil Filter Assemblies are designed in accordance with international regulations. The two sections of the filter housing, each of which has a bolt-on cover plate, are connected by means of a ball change-over valve.

Standard equipment:

*  connections for venting and draining

*  connection for a clogging indicator

1.2  Filter Elements

Max. Allowable D.P.:

BN/HC：20bar；   P/HC: 10bar    W/HC: 20bar      V: 210bar

2.    Description

Mounting                     as inline oil filter

Temperature range    - 10 ℃ ~ + 100 ℃

Pressure setting of clogging indicator △ Pa= 2bar -0.2bar (others on request)

Seals    NBR (=Perbunan)

3.    Notes

*  Filter housings must be earthed.

*  When using electrical clogging indicators, the electrical power supply to the system must be switched off before removing the clogging indicator connector.

*  Filters must be flexibly mounted and not fixed rigidly to the floor or used as a pipe support.

4.    Application

It can be used for mineral oils, lubrication oils, non-flam fluids, synthetic and rapidly biodegradable fluids.

5.   Characteristics

It has the follow general characteristics:

1) A large enough oil-passing capacity and low pressure drop.
2) Filtration accuracy should meet design requirements.
3) Filter element has sufficient strength and dirt holding capacity.
4) The filter element has good corrosion resistance and can work for a long time at the operating temperature.

6. Photos