Buddha Statue Mold Silicone For Plaster/Resin Casting Advantage of our Buddha Statue Mold Silicone--- 1.) Never oily 2.) Resistance to burn 3.) No white stain and sticky problem for craftstone casting&GRC Casting 4.) No viscosity thicker problem
5.) Catalyst--Stable Quality high transparent, no odor, Non-toxic and it can be reach Dow-Cornings & Wacker requirements.
We are very confident that you can't find second one with such environmental catalyst in China. 6. High accuracy in reproducing of very small details
Introduction of Buddha Statue Mold Silicone--- Stamped Concrete Roller Silicone is a low viscosity, two-part condensation cure silicone rubber. It is used for mould making where it is mixed (with its catalyst) and then poured around a pattern to create a flexible silicone mould. Stamped Concrete Roller Silicone has been specially selected for its ease of use, excellent performance and great value.
Once cured the silicone rubber is very soft and flexible making it perfect for casting complicated or intricate shapes where the cast part can be easily removed from the silicone mould.
Advantages of Buddha Statue Mold Silicone--- Advantages - High fluidity -Shelf life:1.5 year - Excellent reproduction of details - we promise non-oily - Low linear shrinkage - catalyst: environmental,non smell - Good release properties with organic resins and gypsum
Datesheet compare with other famous brand---
Model | OTT S825 | Dow Coring RTV 3481 | Smooth On Mold Max 25 |
Mixing proportion of catalyst(%) | 100(A):3(B) | 100(A):5(B) | 100(A:5(B) |
Hardness (A°) | 25 | 21~25 | 25 |
Comparison based on 25 Shore A | |
Density ( g/cm 3 ) | 1.08 | 1.20 | 1.18 |
Viscosity (25 C°,mPa.s) | 15000±3000 | 25,000 | 25000 |
Tensile strength (Mpa) | ≥4 | 4.1 | 3.98 |
Tear-strength (KN/m ) | ≥25 | 25 | 22.76 |
Elongation-break(%) | ≥500 | 438 | 375 |
Working time (minutes) | 30~60 | 90-120 | 60 |
Curing Time (hours) | 12~24 | 24 | 16 |
Liner shrinkage (%) | 0.2 | 0.2~0.4 | 0.2 |
Suggested Uses---
The cured mould can then be used to produce precise replicas of the original part, including fine surface detail, out of a range of materials including polyester, epoxy and polyurethane resin, urethane foam, wax, casting plaster, Jesmonite, and reconstituted stone.
FAQ--- Why is the tear strength of the silicone mold weak? In order to reduce the viscosity of silicone rubber and pursue a good quality, you may add a lot of silicone oil into the silicone rubber when making molds. In fect, it might have just the opposite effect. The tension and tear strength will be reduced badly with the addition of silicone oil. And the silicone molds will be ina weak and flimsy manner.
Packing view---
Company Information--- OTT New Material Co., Ltd. was founded in 2014, and is located in Guangzhou, Guangdong. We are a leading professional silicone material manufacturer, integrating the R&D, production and sales. Main products are Condensation molding silicon rubber, Addition molding silicone rubber, Addition electronic potting silicone rubber, Condensation electronic potting silicone rubber, leather printing roller silicone rubber, LED strip light silicone rubber, human casting silicone rubber, etc over hundreds kind of silicone rubber and related products. Our customers are from all over the world. If you are interested in our products, please feel free to contact us for further information.
Fore more information for Buddha Statue Mold Silicone pls contact Iris. Mob/whatsapp: +86-18571713984 Email:ott.iris123(at)gmail.com / szc(at)ottsilicone.net Skype: ottiris_1(at)outlook.com Website: www.ottsilicone.com