BOPP METALIZED

BOPP thermal lamination film :
Specifications:
1) Thickness:
Glossy:
25mic=12mic BOPP film +13mic glue
27mic=15mic BOPP film+12mic glue
30mic=18mic BOPP film+12mic glue
Matte
27mic=15mic BOPP+12mic glue 
30mic=18mic BOPP+12mic glue
2) Width: 360; 390; 440; 540; 590; 780; 880; 1080; 1320; 1400; 1520 (with 5mm tolerance) (it is upon customers requirements)
3) Connector: less than 2
4) Length: 100m - 3,000m with 10% tolerance
5) Paper core: 1 inch (25.4mm); 2 inch (50.8mm); 3 inch (76mm)
Applications:
1) coating on books and magazines; catalogs; pictures; promotional materials; non-drying adhesive; paper bag; clothes lag;
2) Blueprint document; outdoor advertisement; spray paintings; post; digital print
3) Wedding photograph; photo album
4) outside coating for wrapping box for food; medicine; cosmetic; gift; liquor; etc
 
Environmentally friendly:It is environmentally friendly,nonhazadous to health and safe to use as no toxic gases or volatile content is emitted.Safety in laminating process as no solvent based adhesive is used.
High function:Compared with other solvent lamination,our film is better in clarity and bonding.Strong ability of absorbing powder.It prevents lamination from being pressed,bubbled and shredded off easily.Matt thermal lamination film is good for spot UV and hot stamping.
Easy handing:It is easy to operate once the required temperature is met and no special technique required.
Efficient and energy-saving:Production cost is reduced substantially as there is no film wastage,mixture of adhesive solvent,and no UV heating lamp is reqired.
Adaptable to different kinds of machines:This film is recommended to be used in dry laminator.Small adjustments need to be made to the machine if the film is used in wet laminator.
Process Parameter:Equipment for laminating film:dry and wet film laminator
Temperature: Normal:85~100°C
Special:100~110  °C
Roller pressure:8~15Mpa
Speed:8~50m/min
Remarks:Special laminations refer to those with thicker ink,solid color,high moisture content and bigger size paper.
Using parameters:
Laminating device :dry,wet laminating machine
Hot solls temperature:general print:85-100℃
Special printing:100-110℃
Compression:8-15Mpa
Degree:8-20m/min
Note:for special printing ink layer thickness,refers to the color depth,water and paper quantitatively big print.
Use guidelines:
1.Adjust roller pressure and temperature according to different types of paper and ink.
2.When using the film for the first time or changing to other sizes,we recommend a small trial volume before going into fully mass lamination.

1. The following situation will affect the quality of the film during lamination.

1.When using metal ink.
2.When the ink contains too much wax,dried oil,adhesive,and silicon additive.etc.
3.When the ink is too thick.
4.When the ink is not completely dry.

1. When the paper contains to much moisture.
2. When there is too much powder.

Product specifications and parameters

specification	gloss	gloss	gloss	gloss	matt	matt	matt
Thickness	tatal	24	25	27	29	26	28	30
base	12	15	17	17	15	17	18
layer	12	10	10	12	11	11	12
Weight	㎡/kg	45.04	43.48	40.05	37.27	42.37	39.25	36.63
kg/㎡	0.0222	0.023	0.02497	0.02683	0.0236	0.02548	0.0273
Width	360 390 440 540 590 780 880 1080 1320 1400 1600 1880
Length	200-2300
Paper core	25.4mm(1 inch),76mm(3 inch)
Bonding	Less than 2
Tensile stfength	MD:2.4x10^6dyne/cm CD:5.3X10^6dyne/cm