Blue 5050 SMD Led Chip 5M 300Leds 3M Adhesive Tape 14.4W/M 60Leds/M

Specification

Item No.: SV-5050-ST-60
Led Quantity	60 Leds/M
Input Voltage	DC12V
Emitting Color	Blue
Max. Power Consumption	14.4W/M
LED Light Source	SMD 5050
PCB Width	10mm
Beam Angle	120°
Operating Temperature	-25℃~ +45℃

Product Description Product features
1.Led strip light with using high quality Epistar or Sanan chips, gold line, copper bracket, low-light failure, long life span.
2. For the white color, 3 grades of led chips are optional: 18-20lm/CRI>90, 22-24lm/ CRI>80 3. 8 color temperature sections are optional: 2200-2400K, 2400-2600K, 2600-2800K, 2800-3000K, 3000-3200K, 4000-4500K, 5000-5500K, 5500-6500K.
Product Details 1. Min Cuttable Length is 5CM, led strip length control by yourself. 2. Superior and heat-resistant 10mm PCB. 3. The real 3M adhesive backed tape, strong viscosity, not easy to fall. Strict Quality Control We have a strict quality control system from raw material to finished led strips.Each step must pass strict inspection, strive to produce superior products:
1.Incoming Raw Material Inspection
Comparing incoming raw material and sealed sample in terms of class, quality grade, technical data, ensuring the consistency with purchasing requirements, thus guarantee the ensuing manufactured product fulfilling customers’ requirements.
2.Led Drying
Leds will absorb humidity when exposed to air, which requires 24H drying before SMD.
3.Light-on Test after SMD
After pasting of leds onto the PCB board, each strip panels will be powered to see if any insufficient soldering, slanted leds, and dead leds, if yes, they have to be repaired until qualified; if no, then flowing to the next stream.
4.Light-on and beating test
Strips after SMD (0.5M) should be soldered to 5M roll, after which they have to be lighted again to check if any dead leds, and together with beating test to see if leds fixed tight on pcb board
5.Aging Test
Finished products must undergo at least 8 hours’ aging test 100%
6.Light-on test of finished product
Finished product, before packing, must be lighted again after aging to check if any dead leds.
7.Pre-shipment Inspection
Proofing finished product with customers’ requirements again before shipment, to ensure the consistency of products with customers' needs.
IP Rating IP20：Non- waterproof, available indoor. IP65：Silicone glue or epoxy resin, can prevent the splashing water invade, available indoor. IP67：Silicon Tube, hollow, can prevent the big wave water invade; available indoor and outdoor.
IP68：Silicon Tube+Silicone gel or silicone extrusion molding, completely prevent dust and water invade; available indoor, outdoor and water. Linking operation: 1. Use the power adapter connected to the led strip. 2. The maximum length in series is 5 meters when led strip is DC 12V. 3. The maximum length in series is 10 meters when led strip is DC 24V. 4. Parallel connection is highly recommended as safe electrical operation mode. Applications Led strip widely used in cove lighting, architectural lights for canopy, corridor, Archway, backlight or edge lighting for signage, DIY lights for home use. Certifications Company Information Packing & Delivery Packing Packaging for the led strip:  5 meter per roll,1 roll in an anti-static package; 120 pcs an anti-static in an outer box.

Delivery Delivery term: Sample can be delivered in 3-7 days;                           Bulk can be delivered in 25-45 days; Shipping options: including express delivery, air freight, sea freight etc., we will provide for you the suitable type of shipping. Related Products Digital Addressable RGB Led Strip
RGBW RGB+W Led Strip
Led Filament FAQ Q1. Can I have a sample order for led light? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time? A:Sample needs 3-7 days, mass production time needs 4-5 weeks. 
Q3. Do you have any MOQ limit for led light order? A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1-3 years warranty to our products.
Q8: How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.