1 / 1
Model No. : | soft, 400 |
---|---|
Brand Name : | JDE |
Product description
Products include oil absorption lose inches vapor hose, steam hose, | |||||||||||||||
sandblasting inches lose suction hose pH,the food tube, oxygen hose and various special-shaped tube, | |||||||||||||||
and so on.Widely used in the mechanical, chemical, petroleum, metallurgy, food and other industries |
Product name | Inside.Diameter(mm) | Use | Note |
steam hose | 6-76 | Transfer saturated steam or super | --- |
heated steam under 170°C. working | |||
pressure: 0.35MPaSteam, Heat | |||
water0.8MPa | |||
Petrolatum | 6-152 | Be suitable for many services | It can also adopt |
transfer hose | including gas, watch/machine oil, | outside armoured | |
lubricating oil and other mineral | configuration | ||
oil at normal temperature | |||
Working pressure:0.5MPa-1.2MPa | |||
food tube | 16-152 | Be used in creamery, breweries, | |
cooking oil and liquid drink. | |||
Working pressure:0.5-0.8MPa | |||
Acids and alkalies | 19-203 | Transfer diluent acids and alkalies | Its inside wall can |
transfer hose | solution at normal temperature. | adopt butyl and fabric | |
Working pressure:0.5-0.7MPa | wall adopt fiberglass | ||
for strong acid | |||
transfer | |||
Wearable/durable | 19-76 | Pneumatic conveying for sandblast | It also can be used |
sandblast hose | Working pressure:0.6MPa | as hose of cement | |
tank car | |||
Water tank | 25-102 | Be suited for engine to transfer | |
bending hose | wate | ||
Drilling Hose | 51-102 | Compression and oil resistant, | |
wearable, be used as the flexible | |||
joint hose between Hujing hose | |||
hydrant and standpipe flange of | |||
drill.Working pressure: | |||
10-30MPa | |||
Nylon-line | 51-127 | Be used as flexible joint hope for | It has metal tie-in |
-enwinded | pure oxygen blowing topmost | at the two end | |
blowing Oxygen | convertor Working pressure:1.5MPa | ||
hose | |||
Suction& | 196-900 | For dredger to suction and discharge | It can be equipped |
discharge | mud .Working pressure:Working | with flange tie-in on | |
mud hose | pressure:0.4-0.5MPa | the basis of require. | |
Stiletto hose | 25,32,40 | For bridge&road projects to | Outside glue provides |
stiletto.The pull it can endure is | excellent ripping and | ||
1.50-2.30kg per bar . | dragging performance |
Send your inquiry to this supplier