automatic QT8-15 New Condition and Concrete Brick Raw Material block making machine
specification
Main Technical Specifications |
Standard | JC/T920-2003 |
Vibration Frequency | 3600 cycles/minute |
Vibration Pressure | 75KN |
Production/mould | Hollow block(400X150X200mm) 10Pics/mould |
Hollow block(245X115X90mm) 21Pics/mould |
Solid brick (240X115X53 mm) 32 Pics/mould |
Paver brick(200X100X60mm) 24Pics/mould |
Cycle Time | 15-25seconds |
Production/day(8hours) | Hollow block (400×150×200 mm) 10000-14000 Pics |
Hollow block (245×115×90 mm) 24000-26000 Pics |
Solid brick (240×115×53mm) 60000-70000Pics |
Paver brick (200×100×60 mm) 27000-30000Pics |
Motor Power | 29.4Kw |
Water Consumption | 5-10T |
Number of workers | 7-10worker |
Space of Ground | 5200m2 |
Gross Weight | 10.2T |
Machine Dimension | 5400×1960×3050mm |
Main materials | Cement,crushed stone dust,gravel,sand,coal fly ash,iron/aluminium dust,crushed cinder and some industrial wastes |
Products of machine | Hollow blocks,Solid bricks,Pavers,Kurbstones,Slope blocks,slabs, interlock bricks and so on. |
This type of Block Making Machine has the following advantages Performance and feature
Good design:The bnlance system adopts four-pole guarding way with long guide unit to ensure the exact movement of mould box and pressing head.Gear balance system can make pressing head and mould box move stably in the production.The way of concrete feeding is revolving,convective and compulsive to ensure block density and reduce feeding cycle.Gear driving mode of feeding is more steady.The way of feeder moving is two curved arms drived by two cylinders,which makes feeder move quickly,durablly,and steadly.Stacker is controled by frequency conversion to adjust speed.The movement of stacker is flexible and steady.
Vibration System:The vibration adopts frequency conversion technique.The assembly is oil immersed vibration.This improve high speed loading and makes concrete liquefied and air-outed.The five advantages is vibration assembly synchronization,soft starter,densify block,electric saving and quick moulding.
High automatic level:The machine is high automatic level and advanced design.It adopts international high computor technique to make machine and electric control system to be one part.Our technicians put fault diagnosis,problem alarming into computer by safty logic control.The screen will show fault and methods to client if there is some problems
Steady&Safe System :It adopts separation of high and low voltage electricity ,low voltage controls high voltage technique.This will solve problem of high voltage interfere and ensure gaining of exact signal.It is safe for people and machine .
Waste-Recycle:The raw materials could be sand,stones and so on .The blocks made by our machine is high tensity,low weight ,low cost The machine can realise immidiate stacking if raw materials is good without burning and steaming.
This machine value is higher than its price.You will earn back your cost in short time for its simple operation,advanced moulding,power saving and special production. certificate
contact information
Company Information SHANDONG HUATONG HYDRAULIC MACHINERY CO.,LTD,one of the best block making machine manufacturers in China,is located at Renhe Zone,Gaotang County,Shandong Province,China.And Gaotang is well known as water city and famous for its penmanship and paintings. Huatong covers25000square meters with 8000 square meters construction area,possessing modern assembly line workshops and offices.There are all kinds of machine tools and heat treatment facilities.There are many senior engineers and management personnels