Automatic glass washing machine for professional cleaning

Automatic glass washing machine for professional cleaning

Vertical Automatic glass washing machine is our basic machine for professional glass processing，is key equipment of manufacturer and processing insulating glass industries. Glass washing machine can washing 3-19mm thickness and max width2500mm flat glass.

During the whole washing process,Glass washing machine works automatically, and no need manual operation..Vertical glass washing machine is key equipment of manufacturing and processing insulating glass in architecture, building material and decoration industries. 

Glass washing machine mainly consists of washing section, drying section,drive system, machine frame, tank, blower, electric control system and other parts. 

Vertical Glass washing machine is used for flat glass, especially for glass before coating.
Glass washing machine mainly consists of loading section, washing section, drying section and unloading section.

1, Loading part 

To Avoid the low-e Glass put inverse side and Leave wheel marks or scratch low-e Coating  We use coating inspection -metal film conductive (other company use Photoelectric detection, hard to recognize for higher transparent film coating)
  
(Nylon and Polyurethane + metal column)

2, Washing and Drying part

* Three pairs soft brushes can wash low-e glass and normal glass , the diameter is less than 0.1mm.
* Materials are stainless steel.  
* Wind knife is float design , it always keep the right and suitable distance 3mm between the glass surface and wind knife (Same like LISEC structure(Remark: 3mm is the best drying distance)

There is a universal joint device.When the glass thickness was changed, the air knife can move forward and backward to adjust the distance, so that the relative distance between the wind knife and the glass is constant, so as to avoid the damage to the glass film due to the change of the glass thickness.

* The front and back side squeeze-wheel are all actively move and convey. No mater the glass size is big/ small/thick/thin (8mm) , it all guarantee the glass pass through smoothly.
   
3,  Detecting part
4,  Assembly part 

Built-in beam lifting structure (double beams)
Convenient for detect and wipe the glass

5  Adjustable Pressing Parts

1, There have stress after welding in the Pressing frame ,So out-of -shape problems is inescapable after using some time(machine can not press DGU properly, evenly and tightly )
that is not good for IGU quality, any glass project can not accept these products

For this uneven inescapable issue, here are our solution :

a.we all do the aging treatment , it’s the stress-remove by vibration failure device.

b.The important is We design the 74 points on the backbord, if there have any out-of shape problems we can adjust easily at any time. 

Technical data

Other Insulating Glass Equipment of our company:
1.Insulating Glass Production Line
2.Spacer  Bending Machine
3.Desiccant Filling Machine
4.Butyl Extruder Machine
5.Insulating Glass Sealing Robot
6.Glass Washing Machine