90w Gas Station Explosion Proof Led Flood Light 

1.Modular design: Use 90pcs 1watt high power LED as the light source,
adopt the exceptional modular lighting design with multiple chips integrated into one single module with good heat conduction ability.

2.Constant Current LED Driver: It's constant current & constant voltage design,
Stable electrical current, instant start-up without flicker, more than 0.98 power factor with high efficiency, safety and reliability.

3.Anti-corrosive high-pressure die casting aluminum alloy lamp body with thickness
4mm tempering glass could be well for explosion proof circumstance.

4.Covered with evacuation valve onto the back of fin type heat sink for better thermal conduction.

5. Firmly sealed with silicone rubber which can be resistant to elevated temperatures (over than150℃),
anti-aging, good waterproof and dustproof seal hermetically for the light fitting's body.

1.Please make sure the electrical source has been Cut off before maintenance.

2.The glass and lens better to be cleaned regularly to keep good light transmittance.

3. Periodically clean dust on the outer housing and the heat sink for keeping good heat conduction.

4.Don't use water or corrosive liquid to cleaning it up, better using the dry duster cloth.

5. When it needs to replace for a new LED driver, it just need to use the screwdriver to take it off. It's very easy and convenient. The most important is that don't mix the wires up, make sure the wiring is right. (L: Live line with brown wire; N: Null line with blue wire; G-ground line with yellow or green wire.)

Instruction:

1.Please note that the light fixture's working voltage/frequency: AC85v-265v, 50Hz-60Hz.

Please operate it within the voltage range & frequency range.

2. It contains the aluminum accessories, so it should be handled carefully and don't make great pressure on it.