8 inch inlet Strong Wear-resistant suck large solid sand particle slurry pump

  Product Description 1.1 MH Centrifugal Slurry Pump Introduction  MH series mining slurry pump  is used for delivering slurry with strong abrasion and high concentration for metallurgy, mines, coal and power plant, etc MH series mining slurry pump 's body is used double-deck structure, in other words, being made of inside lining and outside shell.The discharge can be oriented to any 8 positions by 45 degrees to suit installations and applications. 1.2 MH Series Centrifugal Slurry Pump  Structure:
 1.3MH Slurry Pump Performance Parameters :   Drive type DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor. 
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump. 
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space. 
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors. Seal Type There are three standard shaft seal methods: Packing seal, Expeller seal, Mechanical seal. Packing Seal :
As one of the most commonly used seals for rotating shafts, the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing. This kind of seal is suitable for use under all pumping conditions. In situations where corrosive solids or high temperature might be encountered, Teflon or aramid fiber is used as the packing material for the gland. For high abrasion conditions, a ceramic shaft sleeve is available. Expeller seal: The combination of impeller and expeller creates the pressure needed to seal against leakage. Together with the gland seal or lip seal which is used as the shut-down seal, this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site, or sealing water is allowed to enter inside the pumping chamber to dilute the slurry. Mechanical Seal : MH series heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement. Other types of mechanical seal are among options to suit the slurry pump for various pumping applications.   Spare parts Our bare shaft slurry pumps are interchangeable with MH,GH,MG etc series pumps. We supply you one more option if you are tired of long lead time and unreasonable expensive price.
Certainly, we also would like to supply you whole pump systems which include motor or frequency cabinet or speed reduction gear if you need. And you could define their brand which you prefer.
Impeller, Volute, throat bush, shaft, shaft sleeve, whatever pump spare parts, we could supply you at the first time.
The material could be cast iron,high chrome 35%,natural rubber,polyurethane. Just let us know that.   Application Application Horizontal centrifugal mining slurry pump is widely used in transport slurry with slurry with strong corrosive proof and high concentration for many industries such as metallurgy, mine, coal, electric power, building materials and so on.   Problem&Remove Some problems may arise in the process of slurry pump's application.According to the production and the client appliction experience for many years,we give the following solutions:
Processing&Workshop Slurry pump's processing Workshop We have first class production equipment.There are more than 100sets of equipment,such as lost foam casting profuction line,shot blast machine,heat treatment furnace,CNClathe,digital display large vertical lathe,digital display horizontal milling machine etc. Packing&Shipping We package our slurry pumps and parts with plastic cloth inside and waterproof outside.  The wooden cases are export standard.  Also we have professional workers to do these cases. We are very near to Tianjin port, so it is comfortable to deliver anytime, also can save the cost.
Contact us Welcome to contact us!