4000 Rpm Gantry Machining Center Cnc Linear Guide And Direct Drive

1. Standard spindle: Direct driven.
2. Number of axes: 3 axis.
3. Table size: 3,200x2,050/4,200x2,050/5,200x2,050/6,200x2,050 mm.
4. Spindle speed: 40-6,000 rpm

 

 

4000 RPM Gantry Machining Center CNC Linear Guide And Direct Drive

 

 

Description of Machine characteristics:

 

Multi-rail base――Three-wire base design, significantly increasing machine load capacity and life of the machine.

Base oil-water separator――Base oil-water separator design, the cutting fluid is not easy to produce odor, save money and environmentally protection.

Increase column design――With the beam increase the contact area, the greatest degree the center caused by the elimination of processing vibration.

Stepped beams――Beam for second-line rail design, the arrangement of vertical and parallel with, 25%higher than generally parallel arrangement of the rigid.

Widening the box-type slide――Widened box-type structure slide, Build counterweight cylinder, greatly improved the Y-axis rigid cutting ability

Z-axis four-track design――With a four track isometric force in the four directors, the rail close to its centerline in the position of the center of gravity the spindle head, and effectively improve the structural rigidity.

Table Section――Table full travel support, and 63 rail-lines, each 500 mm ball slider, shared equally between the carrying, low wear, low capacity.

Y-axis travel――Itinerary greater than the gate width size, and set aside a magazine trip 90 degree angle head replacement trip, greatly enhance the scope of the machining.

Planetary gear――The triaxial Germany planetary gear reducer, improve motor torque, not belt drive torque loss, to ensure the best mobile speed.

Linear Slide――The three-axis ball heavy duty slider, significantly increasing the load capacity, enhance machine durability and rigidity.

Spur Gear box――6000 rpm two steps step less gear box, day JIS 0 level grinding gears, low speed, heavy cutting and high-speed precision cutting, processing a wide ranger (optional)

Ball Screw――The triaxial using Taiwan to class C3 double nut screw, screw diameter models at the same level, processing more powerful torque.

Counterweight hydraulic――The asanas slide with a system double hydraulic counterweight Z-axis screw and double symmetrical counterweight in the best position of the center of hydraulic cylinder, to ensure that the Z-axis move the balance to ensure that micro mobility and machining accuracy.

Screw Support――4 meters above the X-axis, increasing specially design screw support anti-shock device to provide the axial feed rigid.

Taiwan-made screw counterweight cylinder――Z-axis double counterweight cylinder, design with automatic positioning correction structure and treble accumulator system to ensure the smoothness of high feed.

Optional Accessories――Machine set aside magazine at 90 angle head and three-axis encoder mounting holes, allowing the easer future additional customers without secondary construction.

 

 

Specifications:

 

Item	Unit	HS-GL3227	HS-GL4227	HS-GL5227	HS-GL6227
X-axis	mm	3,200	4,200	5,200	6,200
Y-axis	mm	2,800	2,800	2,800	2,800
Z-axis	mm	1,000	1,000	1,000	1,000
Spindle nose table surface	mm	200-1,200	200-1,200	200-1,200	200-1,200
Spindle center to column	mm	450	450	450	450
Distance between two columns	mm	2,700	2,700	2,700	2,700
Table to the beam height	mm	1,400	1,400	1,400	1,400
Table size	mm	3,200x2,050	4,200x2,050	5,200x2,050	6,200x2,050
T-solt number	mm	28x9x220	28x9x220	28x9x220	28x9x220
Max.weightpermissiable	kg	12,000	14,000	16,000	20,000
Spindle speed	rpm	40-6,000	40-6,000	40-6,000	40-6,000
Spindle taper	#	BT-50	BT-50	BT-50	BT-50
Standard spindle		Direct Driven	Direct Driven	Direct Driven	Direct Driven
Feed of cutting	mm/min	1-8,000	1-8,000	1-8,000	1-8,000
Rapid traverse	mm/min	12	12	12	12
Postioning precision	mm	±0.005/300	±0.005/300	±0.005/300	±0.005/300
Repeat Postioning precision	mm	±0.003/300	±0.003/300	±0.003/300	±0.003/300
Spindle power	kW/N.M	22/140	22/140	22/140	22/140
3 axis spindle power	kW/N.M	X:9/53,Y:7/30 Z:6/38	X:9/53,Y:7/30 Z:6/38	X:9/53,Y:7/30 Z:6/38	X:9/53,Y:7/30 Z:6/38
Pneumatic source requirement	kg/cm2	6.5	6.5	6.5	6.5
Power requirement	kVA	65	65	65	65
Machine weight	kg	53,000	62,000	69,000	77,000
Area	mm	10,000x6,500	12,000x6,500	14,000x6,500	16,000x6,500