1 / 5
Options:
Model No. : | 8080UBC47D45I1A |
---|---|
Brand Name : | Best LED |
Supply Type : | Original Manufacturer |
Shenzhen, Guangdong, China
Product description
What is the maximum power of LED?
In our factory, one single chip with one single color LED, the maximum power of that kind of LED is 3 watt. Which is high power LED single color light source. In this 8080UBC47D45I1A SMD LED, it can work good in 700mA current maximum. In addition, this high power LED can reach high brightness range of 80-100lm. If you looking for some high power LED with super bright lumens, this 470nm LED will work perfectly for your project. Just contact us for more detail about that.
Blue High Power SMD LED Size:
Electrical Parameters:
Parameter |
Symbol |
Rating |
Unit |
Reverse Voltage |
VR |
5 |
V |
Junction Temperature |
Tj |
100 |
℃ |
Operating Temperature |
Topr |
-40 - +80 |
℃ |
Storage Temperature |
Tstg |
-40 - +100 |
℃ |
Soldering Temperature |
Tsol |
≤220 |
℃ |
Electro-Stati-Discharge(HBM) |
ESD |
1000 |
V |
Service lige under normal conditions |
Time |
60000 |
H |
Warranty |
Time |
2 |
Years |
Antistatic bag |
Piece |
500 |
Bag |
*Pulse forward current confition: Duty 1% and Pulse width=10us.
*Soldering confition: Soldering confition must be completed with 3 secongds at 260℃
Parameter |
Symbol |
Rating |
Unit |
Forward Current |
IF | 700 | mA |
Forward Voltage |
V | 3.0-3.2V | V |
Luminous Intensity |
IV | 80-100 | lm |
Wavelength |
λP |
470nm | nm |
Packing |
Piece | 1000 | reel |
Vewing angle |
2θ1/2 |
120 | Deg |
*Luminous intensity is measured by ZWL600.
*λD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Production of SMD Emitting LED:
HANDLING PRECAUTIONS:
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible Althouth its characteristiec significantly reduces thermal stress, it is more susceptible to damage by extemal mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated Led products. Failure to comply might lead to damage and premature failure of the led
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2, Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3, Do not stack together assembled PCBS containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4, 4-A The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks;
4-B A plible material is suggested for the nozzle tip to avoid acratching or damaging the LED surface during pickup.
4-C The dimension of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production;
4-D As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plationg of leadframe. Special care should be taken if an LED with silicone encapsulation is to used near such substances.
5, Please aviod continued exposure to the condensing moisture environment and keep the product away from repid transitions in ambiemt temperature.
6, Product in the original sealed package is recommended to be assembled within 24 hours of opening.
Shenzhen, Guangdong, China
Send your inquiry to this supplier