2.54mm(0.100") Pitch Ejector Head DIP 180° with special short latch

Number 2 No. of contacts: 40P, we also have 6, 8, 10, 12, 14, 16, 18, 20, 24, 26, 30, 34, 50, 60, 64P, when you place order on us, please inform us the exact contact number you want. 

Number 3 contact plating: gold flash, semi-gold and semi-tin, tin plate available, when you place order on us, please tell us the exact contact plating way you want. 

Number 4 insulator color: black, blue and grey advailable, when you place order on us, please inform us the exact insulator color you want. 

Number 5 packing: tray, bag, tube, tube + CAP, tape & reel, tape & reel + CAP available, when you place order on us, please inform us the exact packing way you want. 

What is the ejector header?

The ejector header is a very simple internal wiring device. The characteristic of the ejector header is that the structure on both sides of the header is similar to the horns of a cow. Therefore, it is called a horn connector or a hook horn

connector. In contrast, a simple ejector header is a horn connector without a buckle structure. As required, the common pin pitch of the horn connector has three specifications: 1.27 pitch, 2.0 pitch and 2.54 pitch; According to the different

spacing, the diameter of the square row of needles used can also be changed.

How to install the ejector header?

Ejector header is widely used in electronic field. Therefore, most equipment assembly personnel will face the problem of how to install the horn connector. In fact, we only need to grasp three points.

1 Insertion direction

When the horn connector is fully inserted to U=14.2, it shall be ensured to reach the specified 79483MD.

2 Perpendicular to the insertion direction

If the printed board or fixed board mounted connector is floating mounted, the design of free and fixed board mounted connectors shall give an adjustable displacement of at least 1mm (Note: for rigid mounting of fixed board mounted

connectors, the mounting frame must have a strict tolerance.)

3 Inclination

The design of free and fixed board mounted connectors allows inclination error, with longitudinal axis of ± 4 ° and

transverse axis of ± 4 °.

FAQ

Q: How can I place an order?

A: You can contact any of our sales people to order. Please provide the details of your request as clearly as possible. Therefore, we can send you a quotation in the first time.

For design or further negotiation, it is best to contact our trade manager via Wechat, QQ or other instant means to prevent delays.

Q: Where is your factory located?

A: 3rd Floor, Building B, Park Plant, No. 1 Mengtuoli Road, Shapu 1st Village, Songgang Street, Baoan District, Shenzhen,China.