1 / 1
Model No. : | OSD:83201A |
---|---|
Brand Name : | OUSHIDA |
Jinhua, Zhejiang, China
Product description
Model/ Item no. |
OSD:83201A |
Rated Voltage |
220V/230V/110V/127V |
Rated Frequency |
50Hz/60Hz |
Cylinder diameter |
28mm |
Drill capacity |
32mm |
Rated Input Power |
1200W |
No load speed |
980rpm |
Impact rate |
3800/min |
Silicon steel material |
Cold cool (BAOSTEEL) |
Machine size L*H*W |
39x24x9.5cm |
Machine net weight |
5.59KGS |
Packing |
1 plastic case /pc, 4pc/ctn |
Packing size |
52x43x35cm |
Advantage:
Shock absorbing handle could be against quaking of working machine, high power could save user working time.
1.Multifunction of drill, use 8-26mm twist drill according with wishes.If you want to drill 30mm diameter hole, you also could use 26mm rotary.
2.Could make hole of air-condition. Use long bit to drill through wall, chisel groove on the wall and floor. The bits like as follows:
3.Small twist drill no problem.Chisel also no problem.
4.So this machine is very suitable of professional decorating.
5.Exporting chuck is SDS.
Performance:
Our hammer motor use certificated BAOTEEL 60 cold rolling. Control the source of material strictly. Thermostable copper round the armature. Commutator use certificated original also. The motor fan is strong air exhaust design.
Rotary hammer could hammer chisel, hammer drill, hammer chisel and hammer drill. There is shifting switch to change. If there is no hammer drill. There could change the working chuck to make machine drill. Like add the connector and drill chuck.
The drill capacity is max drilling of 300# concrete.
Attention:
1. The hammer is not continuing working machine. But our machine could continue to work.
Our machine work is easy and fast. Give more good working feeling to user. Like driver has easy and fast driving.
2. Please use sharp bits to work.When work on concrete, stone, marble. Pls use the cover on the machine.
3. When machine is working to drill on the wall or stone, don`t turn off the power to pull out.
4. Don`t change the shifting switch when machine is working.
5. Don`t drill reinforced concrete.
Jinhua, Zhejiang, China
Send your inquiry to this supplier