115 melting point Fischer tropsch

Product information of Fischer tropsch wax 

Fischer-Tropsch(FT)wax is a synthetic wax produced bywax oil that made in the coal to oil unit.The wax oil is distilled to separate the mixture into fuels products and waxes with melting points ranging from about 52-115ºC.
Speedchem provides the most comprehensive choice of synthetic Fischer-Tropsch(FT)waxes ranging from low(52°C)to very high melting point(115°C).The form is prills and color is white.We are the authorized sales channel for kinds of melting point FT waxes.

Advantage of Fischer tropsch wax

Fischer tropsch wax has the advantage of high saturation and linearity,Thermal stability at high temperature,Long chain length,Long molecular weight,High melting point,Hardness,Low surface tension,Low viscosity at high temperature.

Applications of Fischer tropsch wax

Fischer tropsch wax uses are similar to those for polyethylene waxes including hot-melt adhesives and additives for inks and coatings.High quality competitive wax products targeted at the needs of a variety of industries and application areas.The combination of a high melting point,low viscosity and excellent hardness,even at elevated temperatures,provides superior performance in a variety of applications.
Our range of FT synthetic waxes find various applications in the area of Personal Care(cosmetics),Rubber industry,Pharmaceuticals,PVC processing,Hot melt adhesives,Polymer Modification,Color masterbatch processing,Candles,Inks and Coatings and Textiles and Polishes,offering unparalleled,consistent performance.
Ficher-tropsch wax mainly applications:
1.PVC processing:
F.T wax can effectively reduce the plasticizing torque;extend the plasticizing and thermal stability time.As the external lubricant of PVC processing,the lubricant is better than PE wax and paraffin wax,compare with PE wax,the dosage can be reduced by 30%.
Used in outer-lubricant in the process of PVC profile,pipe fitting and plastic molding.It improves the toughness of plastics products and makes smooth surface,high rate of pass,better plasticizing efficiency.
2.Hot melt adhesive:
F.T wax with the characteristics of narrow distribution of MW,high melting point,low viscosity,fast solidification,has good compatibility with EVA resin and petroleum resin,has good thermal stability,will not change color in a few hours under 180°C baking.Suitable to be used in hot melt coating,can replace the imported products.
3.Color masterbatch(Used as inner-dispersant in color masterbatch process)
F.T wax with narrow distribution of MW,odorless,suitable for masterbatch,it has very good Wettability with pigments and fillers,and can reduce the viscosity of LDPE resin,can significantly reduce the processing current in production,so it can save energy.
4.Used as dispersant in ink and paint industry.Better anti-sedimentation makes better gloss and stereo sense.
5.In rubber industry,it can improve the surface brightness and smoothness after products taking off the membrane,reduce the dosage of paraffin wax and reduce the production cost.
6.Widely used in wax products,for example,floor wax,car wax,polish wax,candle etc.It can improve the softening point,strength and surface gloss.

Storage Method of Fischer tropsch wax

It should be in the original package,preserved in dry place at room temperature,avoid direct sunlight and water.