Home> Product Directory> Extra mould release agent
List Of Extra Mould Release Agent Products And Quality Supplier Of Extra Mould Release Agent From China, Bossgoo.com Provide You Reliable Extra Mould Release Agent Manufacturers With Through The Certification. You May Also Be Interested In water Treatment Agent ,abc Powder Extinguishing Agent ,Abrasives Agent ,abs Mould ,absorb Mould
Products(0)
listgrid

Printing Mould Release Agent SY-T

Model No:S066

Printing Mould Release Agent SY-T Performance: 1. The product is the water-loving surfactant aiming to the printing Mould Release for fabrics. 2. It has excellent softening and lubricant performance. 3. Low foam. 4. It will improve the water absorbable for the fabrics and their weaves. 5. Easily soluble in the water, soluble in warm water at 40-50℃ freely. 6. No any adhesion between the weaves and printing membrane. Characteristic: Appearance: slightly yellow thick yellow or paste. Component: Fa...

Vacuum Epoxy Pultruded Without Mould Release Agent Rods

Model No:fiberglass

Profile 1. Capacity: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China. 2. Technique: The only one using vacuum injection technique without Mould Release Agent. 3. Test: Rods passed tests in domestic labs, including WHVRI, CEMT, XIHARI, especially passed KEMA tests in the Netherlands and 7200h stress corrosion test. 4. Standards: IEC, ASTM, GB, DL 5. Application: Rods operate in high voltage lines up to 1000kV. Features 1. Range: Diameter 5-130 mm; Length 0-12.5...

Mould Release Agent

Model No:YH19

Specially designed to provide a silicone oil type Mould Release Agent for most common plastic and rubber, etc. It is non-toxic and non-paintable, colorless, low surface tension, no-pollutant and non-staining. Widely used on resin(epoxy, phenol, melamine, ABS, PVC), rubbers and plastics.

Spary Gun For Pu Mould Release Agent Use Polyurethane Foam Gun

Model No:Spray Gun High

Min. Order:1

Spary Gun For Pu Mould Release Agent Use Polyurethane Foam Gun Product Description What is  standard technical parameters ?                                 Standard Technical Parameter The ratio of raw material  1:1 Max working pressure 35Mpa(250bar) Max fluid temperature 80°C Max output 1-12kg/min  Air inlet pressure 0.2-1.2Mpa Type of nozzle Spray(or injection) Clean mode Self-clean by air  Weight  0.8kg     What is working?                                                             What is p...

High performance lubricant Release Agent (Release Agent, Parting Agent, PAA)

Model No:High performance lubricant release agent

Min. Order:50

High performance lubricant Release Agent (Release Agent, Parting Agent, PAA) Description: Mainly used for PVC, EVA, LDPE, PP, polystyrene and other plastics lubricating and Release agents, the performance is far beyond the hard fatty acid products with excellent external lubricating effect and Release properties; can be used as the polyolefin film antiblocking Agent; can be used as synthetic rubber or natural rubber internal mold Release agents, lubricants and brightener, is ideal ink dispersant...

Silicone Rubber Mould Release Agent

Model No:CL-10T

Silicone Release Agent CL-T10 Product description CL-T10, one component, a kind of Release Agent add in raw material for high temperature cured silicone rubber and fluorinated silicone rubber.It`s easy to disperse and Release the silicone rubber from the mold. A small quantity of Release Agent, large increasing production with high quality. Application: Be exclusively used in silicone keypad, silicone sheet ...

Mould Release Agent

Model No:OEM

Product Details Basic Specification Material Others Detail Description Specifications Silicone oil Spray Mould releaser1.Excellent Mould-Release effect2.forms resisting film to prevent body adhesion60-150cent Description: This high-efficiency Silicone oil spray (Mould-releasing) can be applied in temperature between 60 to 150°C for Mould-releasing in plastic and rubber industries as well as metallic casting Mould. It forms the resisting film to prevent body adhesion, and will not corrode the bod...

Mould Release spray for concrete aluminium steel formwork

Model No:AF---052

Min. Order:100

Mould Release spray for concrete aluminium steel formwork Product Description 1.Title:aluminum formwork system (Monolithic casting) 2.Material: 1) All of panels: 6061-T6 aluminum alloy 2) Accessories(waler, prop, wedge, pin, push pull prop, tie rod, wing nut): Carbon steel and casting iron 3.Product application: Monolithic casting or Separate casting(shear wall structure) 4.Inspection: Pre-assembly the panel to check product applicability before shipment SPECIFICATIONS Item Concrete formwork, ...

Erucamide brightening mold Release Agent for Wire Cable

Min. Order:1

Delivery Time:7 Days

Use Of Erucamide 1.Erucamide can be used as polyolefin, PVC, TPA and other polystyrene plastic and urea formaldehyde resin of the smooth Agent and Release Agent, with excellent external lubrication effect and stripping performance. 2.Erucamide can also be used as anti adhesion Agent of polyolefin film, usually used in conjunction with oleic acid amide erucic acid amide. It with the commonly used inorganic antiblocking Agent (silica) compared to has no effect on the characteristics of the transpa...

Thickening Agent Adhesive Agent CMC Powder

Min. Order:5

Delivery Time:15 Days

CMC (Carboxyl Methyl Cellulose) is white or light yellow powder with Moisture 10% max, PH 7.5-9.5, Purity 65% min. CMC is mainly used for oil&gas driling, synthetic detergent, ceramic, printing gum, textile sizing, food. CMC can be used in textile sizing, printing gum, ceramic body, waterborne coating, oil driling Hydroxypropyl methylcellulose (HPMC) is widely used in building materials, coatings, synthetic resins, ceramics, medicine, food, textiles, agriculture, cosmetics, tobacco and other...

Yellowish Uniform Mold Release Agent Type Emulsifying With 2mg/kg Arsenic

Product Name: Mold Release Agent Appearance: Oily Flowable Liquid With Layers Certification: HACCP ISO Usage: Biscuits, Bread, Cakes, Candies Color: Milky White, Yellowish Adour: Natural Adour, Taste Of Oil Characteristics: Less Lampblack, Strong Adhesive Ability, Thorough And Efficient Release Yellowish Uniform Mold Release Agent Type Emulsifying With 2mg/Kg Arsenic     Description:   Vivid® Release Agent is oil type Release Agent developed to be used in biscuits, bread, cakes and candies relea...

Silicone Mold Release, Mold Release Agent

Model No:AK-ID5014

Item No.:  AK-ID5014Product name: Silicone Mold Release Other name: mold Release Agent Features: Non-Ozone Depleting Saves time - lets parts Release quickly and easily from molds. Improves part appearance and reduces defects caused by sticking. Description:AK-ID5014 SILICONE MOLD Release Agent is specially formulated as a Release Agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. Provides fast, easy part removal from molds and multiple par...

High temperature mold Release Agent

Model No:IOTA-257

Min. Order:500

High temperature mold Release Agent Product article: IOTA-257 Product Name: high temperature resistant silicone oil (long chain alkyl, aralkyl modified polysiloxane) Product alias: High temperature resistant silicone oil High temperature heat conduction oil High temperature lubricating oil High temperature mold Release Agent Structure or component: long chain alkyl, aralkyl modified polysiloxane Performance characteristics: This product is high temperature resistant, excellent lubrication perfor...

Tubular Battery Grid Die Casting Machine

Model No:HT-CMX

Min. Order:1

Tubular Battery Grid Die Casting Machine Application: It is used to produce the positive spine of the tubular lead acid battery. It can realize the adding lead ingot into lead pot, casting the spines, taking out the spines, spraying Mould Release Agent, storing the spines, cutting the spines, inserting spines into gauntlets automatically. After spine cutting, the wasted spine will be crushed and conveyed to lead pot for recycle use. Machine Composition: CMX-I include automatic lead ...

HUATAO GROUP LTD

Hebei Shijiazhuang

Hot selling Calcium stearate with cas 1592-23-0

Model No:SY-1592

Min. Order:1

Hot selling Calcium stearate with cas 1592-23-0 Product description: Calcium stearate is also called calcium octadecate. White light crystalline powder. Chemical formula (C17H35COO)2Ca. Molecular weight 607.00. High melting point of 179 ~ 180 ℃, the thermal decomposition.Insoluble in water, cold ethanol and ether, soluble in hot benzene, toluene and turpentine, slightly soluble in hot ethanol and ether. Decompose with strong acid into stearic acid and corresponding calcium salt. It absorbs wat...

micropowder graphite

Model No:-385

Use:Micropowder graphite can be used 1.as Mould Release lubricant in the production of catalyst of in chemical fertilzer industry. 2.as basis material of high-temperature or corrosive resistant lubricants. 3.as Mould Release Agent in powder metallurgy or raw material in metal alloy. 4.as packings or catalysts of rubber,plastics and varieties of composite materials

High-carbon flake graphite

Model No:-196

Min. Order:1TON

Specifications:The particle size ranges from 0.025-0.5mm and the carbon content ranges from 80-99.9%. Advantages:Excellent property of crystalline flake graphite,unusual oxidation resistance,self-lubricity,mouldability and adhesivity,superior electric and thermal conductivity. Usage: 1)As Mould Release lubricant inthe production of catalyst of in chemical fertilzer industry. 2)As basis material of high-temperature or corrosive resistant lubricants. 3)As Mould Release Agent in powder metallurgy o...

Supply natural flake graphite

Model No:SEA WHALE

Natural Crystalline Flake Graphite Types:FS and F Specifications:The particle size ranges from 5μm to 38μm. Advantages:Excellent property of crystalline flake graphite,unusual oxidation resistance,self-lubricity,mouldability and adhesivity,superior electric and thermal conductivity. Use:Micropowder graphite can be used as Mould Release lubricant in the production of catalyst of in chemical fertilzer industry. as basis material of high-temperature or corrosive resistant lubricants. as Mould...

micronized graphite

Model No:+895

Min. Order:1 ton

Advantages Excellent property of crystalline flake graphite,unusual oxidation resistance,self-lubricity,mouldability and adhesivity,superior electric and thermal conductivity Usage as Mould Release lubricant in the production of catalyst of in chemical fertilzer industr as basis material of high-temperature or corrosive resistant lubricants. s Mould Release Agent in powder metallurgy or raw material in metal alloy. as packings or catalysts of rubber,plastics and varieties of composite materia...

EVA high foaming machine

Model No:JZ-3000

Min. Order:1

EVA high foaming machine Suitable: It is use for EVA, PE.SBR and latex high multiple foam forming, the foaming is 25-45 times. Features: 1. High Efficiency:adopted specific steel pipe to make heating-plate, large thermal conductive area, rapidly heating and cooling and its efficiency is 20% higher than the same kinds of products. 2. Material Saving:after grinding the shape-bored steel plate, which is smooth an polished, and 30% of Mould Release Agent can be saved. 3. Steam Saving:the machine use...

Micro Powder Graphite 

Micro Powder Graphite Specification:Granularity range 1μm to 38 μm , Carbon Content 88% to 99%,Pass Rate 80% to 97%.Technical data: Spec Carbon Content %≥ Ash Content%≤ Moisture%≤ Granularityμm ≤ Pass Rate %≤ FS-1 98 1.4 0.50 1 80~97 FS-2 1.4 0.50 2 80~97 FS-4 1.4 0.50 4 80~97 F-1 1.4 0.50 6 80~97 F-2 1.4 0.50 10 80~97 F-3 1.00 38 90~97 F-4 95 1.00 F-5 5. 0 0.50 F-6 6. 0 0.50 F-7 5. 0 0.50 F-8 5. 0 0.50 F-9 0.7 0.50 Application: 1. As Mould Release lubricant in the production of catalyst in chem...

Hexamethyldisioxane CAS: 107-46-0hmdso

Model No:HMDSO; MM

HEXAMETHYLDISIOXANEApplications: It is used as end capping Agent,cleaning Agent,and Mould Release Agent mainly in the organic chemical industry and medicine chemical industry.Package: plastic drum. Net weight:150kg,160kg.Notice:1.Store at -50ºC --45ºC . It is prohibited to contact open frie,and shall be kept ventilating, drying, and prevented from sushine.2.Shipping conditions: It shall be prevented from collision, raindrenching and sunshine, transported and stored according to the standard for ...

Mould Release Agent Use Micropowder Graphite

Model No:5um-38um

Introduction: Natural Flake Graphite-microsized graphite Crystalline Graphite Chemical Perperties: FC: 99% min; Ash: 1% max; Moisture: 0.5% max Physical Perperties: Size: -1000mesh, 50% min; Application: Metallurgy Hi-tech materials Lubricant Package: 1 type: 20 or 25 KG small paper bags; Moisture resistance; Sea-worthy; Hard and difficult to tear 2 type: 1MT big bag with four straps and under mouth or 20KG small bags into big bag Pallets available. 3 Type: Small bags onto pallet with film Stret...

E-Glass Rod ECR Rod for Composite Insulator

Model No:insulation rod

E-Glass Rod ECR Rod for Composite Insulator: 1. Capacity: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China. 2. Technique: The only one using vacuum injection technique without Mould Release Agent, Patent No. 200610041850.1. 3. Test: Rods passed tests in domestic labs, including WHVRI, CEMT, XIHARI, especially passed KEMA tests in the Netherlands and 7200h stress corrosion test. 4. Standards: IEC61109 IEC61952, ANSI C29.13-2000, GB/T19519, DL/T810 DL/T864 5. App...

Micropowder Craphite

Model No:natural

Place of Origin: Shangdong China (Mainland) Brand Name: SEA WHALE Model Number: FS. F-198 Size: 3000mesh-400mesh Type: Natural Application: Refractory, lubricant, catalyst, additive Shape: Flake Graphite PowderCarbon Content: High-Carbon Carbon: 80%-99.9% Moisture: 0.5% Ash: 0.7%-5% Packaging & Delivery Packaging Detail: 1)25kg water-proof bags 2)1 bulk big bag 3)20 ton / 20 ft container or customer request Delivery Detail: Within 15-30days after signing contract Specifications WIith a high ...

Car Care Products (ID-301--317)

Model No:ID-301--317

1. Engine protect products: Carburetor cleaner, anti rust lubricant, engine degreaser 2. Car cleaning products: Polish wax, tyre foamy cleaner, all purpose foamy cleaner 3. Car wax series: Carnauba wax, liquid wax, water proof wax 4. Tyre repair: Tyre sealer & inflator, liquid tyre sealant Details as below: 1). ID-301 Carburetor Cleaner; 2). ID-302 Dashboard Polish (cockpit cleaner), with more than 10 flavors and smells 3). ID-303 Anti Rust Lubricant; 4). ID-304 Brake Cleaner; 5). ID-305 Pit...

Micropowder Graphite

Model No: FS and F

Min. Order:10

Micropowder Graphite Type: FS and F, and particle size ranges from 5um to 38um. Advantages: with high quality natural flake graphite performance, and properties of special anti-oxidation, self-lubricating and plasticity on high temperature as well as good electrical conductivity, electroheat and adhesion properties . Application: (1) As stripping lubricant for the catalyst production in fertilizer industry (2) The high temperature lubricant material, corrosion-resistant lubricant material. (3) A...

Pilot Operated High Pressure Oil Release Valve

Model No:DR

Min. Order:10

FEATURES: -Subplate mounting for pressure Release valve -For threaded connection -For cartridge connection -4 adjustment elements . Rotary knob. . Sleeve with hexagon and protective cap. . Lockable rotary knob with scale. - 4 pressure setting for oil Release valve -Optional check valve ( only for valve for subplate mounting). TECHNICAL DATA Max. pressure: 31.5Mpa MAX. Flow: 400L/min Quality tested: High pressure testing before delivery Why Choose Us 1. With 30 years experience of hydraulic comp...

liquid silicone rubber for Plaster Mould

Model No:602# 625# 630# liquid silicone rubber

Applications for liquid silicone rubber for Plaster Liquid silicone rubber for Plaster is primarily intended for plaster, ceiling, centre pieces, cornices, arches & alcoves, columns, figures, niches, panel corners, panel Mould making and so on. Datasheet for liquid silicone rubber for Plaster Item viscosity(CS) Hardness shore A Tensile-tstrength (kgf/cm2) Tear-strength(kgf/cm) elongation: (%) shrinkage: (% Curing Agent ratio (%) Pot time (minutes) 620 13000-15000 20±2 20-23 16-22 380-...

Mould making silicone rubber

Model No:HY625

Min. Order:100kg

Key words: mold making silicone rubber,liquid silicone rubber,RTV-2 silicone rubber,molding silicone rubber,silicone rubber for mold making,liquid RTV silicone rubber Model:HY620,HY628,HY638,HY640,HY718,HY728,HY238 1.Applications of mold making silicone rubber: Mould making silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, human replica, stationeries, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic ...

Hong Ye Silicone Rubber Company

Guangdong Long Gang District

RTV2 silicone rubber for gypsum cornice Mould

Model No:RTV2028

Min. Order:200

Description of RTV2 silicone rubber for gypsum cornice Mould: Liquid RTV2 Silicone Rubber is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing Agent of 2% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 4-6 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. RTV2 silicone rubber for ...

rtv silicone rubber for silicon cake Mould

Model No:E620 platinum rtv2 silicone

Product Details Basic Specification Certificate ISO9001,SGS,RHOS, REACH appearance liquid silicone Package 25kg/drum 200kg/drum Color Any color is available application addtion cured molding silicone rubber Eco-Friendly Yes Test Report SGS Detail Description platinum rtv2 silicone rubber for silicon cake Mould     Product Description platinum rtv2 silicone rubber for silicon cake Mould description Platinum Silicone Rubber is generally named two-components silicone rubber,  Part A is a flowable l...

Silicone Loaf Soap Mould, Easy to Demold

Model No:SM009-JY

Specifications: Easy de-mold silicone soap mold/Mould De-mold easily Large volume, sharp corner and heat-resistant No need lining Durable and think wall Advantages: Our molds can work great with temperature exceeding 200°C, flexible and can be used for thousands of times Demolding easily and no Release Agent needed Working temperature range: 40 to 200°C without any deformation No more fuzzy with peeling Mould off Moulds can be removed without any releasing Agent, just like taking off customer’s ...

3D Molds Apple Shape Soap Molds Silicone Candle Mould Nicole R1235

Model No:R1235

Quick Details Place of Origin: Shandong, China (Mainland) Brand Name: Nicole Model Number: R1235 Shaping Mode: Silicone Mould Product Material: Rubber Product: Household Product mold size(cm): 8*4.6*5.3 inner size(cm): 6.5*2.6*4.6 color: Random brand name: Nicole material: Food-grade silicone lifetime: Thousands of times feature: No Release Agent needed Environment temperature(ºC): Work grest with 200 degrees approval: SGS, FDA AND pony kinds: Over 3000 kinds Packaging Items per Carton: 80 Piece...

Concrete Block Mould

Model No:SP20 25 30 TP30 40

Key Features: Cheap, fast way to define restricted areas Secures & stops erosion of embankments Provides options for in-house use throughout the company site Fast block construction Easy to adjust or move blocks Durable and robust cost effective lego block moulds Perfect outlet for your left over concrete. Never pay to have your concrete disposed of. The Mould is a 2 part L shaped thick heavy gauge steel Mould with 10 interlocking dimples. The two L shaped steel pieces fit together using a s...

Food Grade Liquid Silicon Cake Mould Making (RTV1020L)

Model No:RTV1020L

Basic Info. Model NO.:RTV1020L   Material:Silicone Rubber Appearance:Liquid   Item:RTV1020L Color:Translucent   Mixing Ratio:10:1 1:1 Mixed Viscosity:9000 Cps ( Adjustable )   Working Time:60 Mins Curing Time:8-12 Hours   Tear Strength:16 N/Mm Hardness:20 Shore a   Shrinkage:<0.1% Elongation:550%   Export Markets:Global Additional Info. Trademark:MC SILICONE   Packing:20kg/Drum, 25kg/Drum or 200kg/Drum Standard:REACH   Origin:China HS Code:39100000   Production Capacity:8000kg/Day Product Des...

Model Release Oil Agent (AL7504)

Model No:AL7504

Model Release OIL Agent Art No.: AL7504 Content & Packing: 450ml/can, 12cans/carton Loading Capacity: 2500ctns/20'FCL Application: Aristo mold Release Agent, suitable for uses as plastic mold Release for ABS, PVC, PE, NYLON, ACRYLICS, PS, PP, PC, SAN product. Aristo Mold Release Oil Agent adopts a formula prepared from composite materials with high load bearing capacity and strong pressure & wear resistance. It can provide oil, dry and neutral type per customers' technical requirement.

Easy Demolding Silicon Mould

Model No:CSN-8625E

FEATURES: 1. Two-part silicone rubber: Flowable liquid silicone; 2. Cures at room temperature within 1-5 hours; 3. Excellent fluidity and good operability, easy to demold; 4. Good tensile and tear strength, low shrinkage; 5. High temperature resistance; 6. High duplication times. TECHNICAL GUIDELINES: 1. Stir the liquid silicone (Part A and part B) well before use (except when depending on machine ). 2. This is a 100 Part A to 100 Part B mixing ratio by weight. Weigh the desire amount of part A ...

Rubber-Component Silicone for Gypsum Mould Making

Model No:silicone rubber for sculpture molds

Rubber-Component Silicone for Gypsum Mould Making applications:Rubber-Component Silicone for Gypsum Mould Making good for:1. Statues, prefabricated concrete, fountains and garden articles,2. Rosettes, cornices, sanitary fixtures, decorative pottery,3. Giftware, industrial equipment, decorative candles, gaskets, mechanical components4. Also for soles footwear, archaeological findings or automotive prototypes mold making.Rubber-Component Silicone for Gypsum Mould Making silicone1. Deal with origin...

1,2-Benzisothiazolin-3-One(BIT)

Min. Order:1

English Name:1,2-Benzisothiazolin-3-One(BIT) Molecular formula:C7H5NOS Molecular weight:151.188 CAS NO. :2634-33-5 Characteristics: 1. Be of high thermostability, maintain stable under temperature 180 ℃. 2. Be stable to acid and alkali, could be used in wide PH range. 3. Be of high fungicidal efficiency, Bactericidal broad-spectrum, be effective to bacteria, Mould, X-YLC and algae. Be of high degree of activity to Sulfate-Reducing Bacteria. 4. Be of good security, LD50, Rat mouth>400mg/kg, toxic...
In the past 6 months, 51% of buyers have found quality Chinese suppliers through extra mould release agent.
Looking For Extra Mould Release Agent You’ve Come To The Right Place. This Page Is Your Extra Mould Release Agent One-stop Source For The Competitive Price And Quality. If You Have A Difficulty Finding A Right Supplier, Post Your Buying Leads For FREE Now! Or Find absorbent Agent ,ac Agent ,ac Blowing Agent ,ac Foam Agent, ac Mould Here!

Accurate Supplier Match

If you do not find the desired product, Bossgoo.com will match Precise suppliers for you

Post Buying Request

Subscribe to E-mail

Subscribe to your interested "extra mould release agent". We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

Sign in or Join Free now
  • Sign in on Bossgoo.com
  • Join Bossgoo.COM
AccountForgot Password?
Password
Supplier   Buyer