Sign In Join Free
1 / 1
ZMP Series of Low Speed High Torque Hydraulic Motor
| Brand Name : | Qinfeng |
|---|
Product description
Specification
Brief introduction
ZMP Series of Low Speed High Torque Hydraulic Motor,Definitions and uses a hydraulic motor is used to refer to the output rotary motion, the hydraulic pump to provide energy into mechanical energy of the energy conversion device. But thelow speed high torque hydraulic motor is refers to the speed is relatively low, but the hydraulic motor output torque is relatively large, mainly used in injection molding machinery, ships,Yang machine, engineering machinery, construction machinery, mining machinery, mining machinery, metallurgical machinery, ship machinery, petroleum chemical industry, port machinery etc.. Type low speed high torque hydraulic motor can be divided into: the radial plunger type hydraulic motor, a crankshaft connecting rod type hydraulic motor, swing cylinder type hydraulic motor and a cycloid hydraulic motor and so on.
Specifications
Operation note
(1) all the components are properly connected operation before the inspection of hydraulic system, through the filter the oil to the specified height.
(2) start and run 10~15 minutes at no load condition, and the exhaust, fuel tank foam, system noise, and a motor cylinder lag into the witnesses in the air system.
(3) to exclude air, fill the tank, and then began to increase gradually until the motor load, maximum load, observe whether there is abnormal, such as noise, oil rise and oil leakage.
(4) a replacement of oil by 50 hours of operation, after the replacement according to the maintenance rule.
(5) such as non motor fault, please do not easily removing
Hydraulic motor fault needs to be disassembled, please pay attention to the following matters:
(1) the combination of disassembly don't damage the surface, such as scratches, need trimming to assembly.
(2) wash with gasoline or kerosene all parts before assembling, prohibit the use of cotton rag scrub or parts, the application of brush or silk, must not be a rubber ring immersed in gasoline. Motor installed in the hydraulic oil, installed before the two oil port need to add 50~100 ml, rotation of the output of oil, if no abnormal phenomenon can be installed.
(3) in order to ensure the correct direction of rotation of the motor, the need to pay attention to the relationship between the rotor and the output shaft position.
(4) back cover bolts must be diagonal gradually tightening, tightening torque for 4~5 kilograms, meters.
Products advantages
1, small volume, light weight, its size than other types of hydraulic motor torque is small much the same.
2, wide range of speed, stepless speed regulation, the minimum stable speed up to 15 rpm, convenient installation, low investment cost.
3, in the hydraulic system can be used in series, but also can be used in parallel.
4, inertia is small, easy to start under load, positive inversion can be used, without stopping and reversing. Cycloid hydraulic motor widely used, mainly for agriculture, fishery, light industrial, transportation, mining, the slewing mechanism of heavy construction machinery and so on many kinds of machinery.
Send your inquiry to this supplier
Product Alert
Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.
Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions.
Copyright © 2009-2024 Bossgoo Co., Ltd. All rights reserved.
