Zjn Rotary Harrow Dryer for Organic Fertilizer Drying

1 .Brief Introduction:

Zjn Rotary Harrow Dryer for Organic Fertilizer Drying

Organic fertilizer mainly refers to the biological fertilizer produced by raw material of fresh chicken manure, pig manure etc. and does not contain any chemical ingredients. The organic fertilizer is high humidity and viscousity and stinky. But it is rich of nitrogen, phosphorus, potassium, organic matter, amino acids, Protein and other ingredients. Through drying, deodorizing and palleting by ZJN drying machine, these organic fertilizer can be used as medium for planting mushrooms, as well as green compound fertilizer for farmland to improve the soil and provide adequate nutrition for crops.

Our drying machine particularly set three drums, materials directly get in touch with hot air. Equipped with automatic conveying, feeding, discharging device. Wet material and high temperature hot air together into the first level drum which with the largest space and special rotating rake device. Wet sticky organic fertilizer drop through the rotary rake device, instantly broken into small pieces, fully contact with the hot air, the surface will dry immediately, thus preventing from re-bonding. Driven by hot air and drum ratation, the organic fertilizer flow to the end of the drum, and folded back, reciprocating through the ring channel in drums and reaching to the discharger when meeting requests. Each type of cylinder is equipped with different angles and distances material boards, which will guarante the organic fertilizer moves along the spiral movement in the drum and maintain adequate residence time and sufficient dispersion. Therefore, material is sufficiently hot exchanged with the hot air. Organic fertilizer dryer also equipped with deodorant, dust removal device to ensure that the air and environment clean.

Drum rotary speed, feeding volume, air volume can all be adjusted according to process conditions and requirements. It is stable and high operability and controllability. Long drying process, low exhaust gas temperature, high heat utilization, material drying completely and uniform, to achieve a truly high efficiency and energy saving.

2. Application Area :

(1).Ore:Ore,slag,mineral power,limestone, quartz, fluorite powder,iron ore,metal ore concentrates, metal tailings,etc.
(2 .Metal:Metal powder, iron powder, iron filings, steel scrap, copper filings, etc.
(3).Chemical industry:Gypsum powder of desulphurization gypsum stir-frying half water model and building gypsum powder,clay,diatomaceous earth, kaolin,bauxite
(4 .Coal:Raw coal,coal slime, coal,coal ash,coal cinder
(5).Sand:Sand,quartz sand,moulding sand,river sand
(6).Various crystals:Light calcium carbonate, activated clay, magnetic powder, graphite, mineral mud, clay, lime slurry, ore slurry, phosphorus slag, aluminum red mud, feldspar powder, fly ash, blue carbon, potassium, sodium, calcium, barium and alkali metal or silicate minerals in the alkali metal.
(7) .Wood:Sawdust, small wood chips, wood veneer.
(8) .Fertilizer:Compound fertilizer, organic fertilizers, inorganic fertilizers, ammonium sulfate fertilizer
(9) .Agriculture:Straw, grass, turf.
(10) .Animal manure:Chicken manure, duck manure, cow dung, etc.

3. Features:

Advantage of Rotary Dryer
(1).High production capacity
(2).Lower consumption and operation cost
(3) .Capable to dry different kinds of product
(4) .Stable operation
(5) .Uniform dried product
(6).Both dryer and calciner, operation Temp.Up to 1000°C
(7 ).Heat source can be steam, electricity, coal, natural gas etc.

4. Working Principle:

(1).Putting the hot air and material into the first stage of drying equipment.There is a "Rotary Hollow Rolling Broken Device" in this stage, which breaks the material into scattered and "boiling suspended" state.With the hot air, the material will be keeping rolling, rotation and separation, and its surface will be dry, which can effectively prevent particles from clustering again.Thus the important transformation "high humid -→ not humid, high sticky -→ not sticky, high viscous to not viscous" is completed.With the function of Material Raising System, the material will be continuously threw and raised.The entire drying room will be filled by a complete material "curtain", which can make the material abundantly and evenly contact with hot air, thus increasing the heat utilization and evaporation intensity.
(2).With the effect of special Material Feeding and Raising System, the scattered material being discharged in the first stage will be sent to the second stage cylinder.However, water vapor produced in first stage is automatically discharged at the end of first dryer.The second stage cylinder adopts "Counter-Flow and Vortex Drying Technique".It means the material being transported in reverse direction with fresh hot air flow.It can increase the turbulence intensity and the drying efficiency.At the same time, the heat diffusion is also fastened, then the water will be speed out.Thus the evaporation also speed up.Water vapor is discharged at the end of the second dryer.However, the material is automatically sent into the third dryer under the action of specific material pushing board.
(3).The third cylinder adopts "Inter-flow plus Reciprocating Drying Technique.Under the action of hot air and material pushing board, the wet material moves slowly and reciprocating, while the dry material moves in advance and fast.Material will be discharged automatically when they are dry enough as request.

5. Company Information:

Established in 1991, Jiaozuo ZJN Environmental Protection Equipment Technology Co., Ltd(was named Zhuoyue Drying Equipment Factory) is an innovative enterprise who has been specialized in the technology researching, equipment manufacturing and project engineering of drying high humid and viscous materials.
Take "high-efficiency, energy saving, being practical" as the principle, our company dedicates in environmental protection business.With over 20-years striving and innovation, we have got outstanding achievements in drying technology for sludge, solid waste and slags.We are always in the front of domestic drying technology which is rapidly developing.Based on advanced scientific management, integrity and pragmatic spirit, ZJN has won over 100 items of national patents, as well as being awarded many national honors and titles, such as "Identification of scientific and technological achievements", "China Top 500 Private Technology Enterprise", "Integrity Model Company".We also passed ISO 9001:2008 Quality certification.
Sticking to the combination of production, study and research, we cooperate with School of Environment & Natural Resources of Renmin University of China, Environmental Protection Research Institute of Beijing Institute of Science and Technology, Henan Polytechnic University and establish ZJN Drying Technology Researching Center, which independently designed, researched & developed, then produced the "Rotary Harrow Rolling Triple Stage & Multi-loop" Drying Equipment.The usage of this equipment made good economic, social and environmental benefits.It has been widely used in many industries such as Paper Making, Textile, Dying, Printing, Electroplating, Leather, Pharmacy, Chemical, Sewage Treatment, Feed, Liquor, Starch and Biological fermentation.

6.Packaging & Delivery:

Packaging Details New Type Energy Saving Industrial Drying Equipment Rotary Drum Dryer package:Standard export containerPortShanghai,Dalian,Qingdao dryer Lead Time :15-30 days after prepayment Rotary Drum Dryer

7. FAQ:

Q:Why we believe in ZJN Environmental Protection Equipment Company?
A:1.More than 20 years experience.
2.We are the leading professional supplier of mining equipments and service for quartz mining equipment industry.
3.All products achieved ISO9001:2008 quality management certificate and EU CE certificate.
Q:Delivery time
A:The lead time is 10-30 days, Delivery time will vary depending on the type of the machine, shipping method selected and  port availability.
Q:Payment terms
A:Accepted Payment Type:T/T, L/C, Western Union, Cash
After sign the contract, pay the 30% deposit of total purchase price and pay the full payment before delivery.
Q:What will you do if the machine is broken down?
A:The Products warranty is one year.We will provide the technical advice and find the solution immediately for you when the machine is in trouble.For those wear parts, we guarantee the high quality parts for long-term supply.
Q:What should I do if I want to get a best quotation?
A:If you want a suitable type for you ,please let us know your material and capacity.