Specifications 1.Compatibility: compatible with Zirkon Zahn milling system
2.Strength: high strength,above 1100MPA
3.Powder:Toso material
Zirkon Zahn System blocks 1. Review: AIDITE zirconia block is made from the finest and most pure zirconia ceramics powder with Cold Isostatic Pressed(CIP). (1) AIDITE Zr- block is a partially sintered 3mol% yttria (Y2O3) stabilized zirconia (ZrO2) block, which is made from Japan Tosoh zirconia powder by cold isostatic pressing and machining. It is more homogeneous than uniaxial pressed.After fully densified, Zr-block has a high strength, excellent biocompatibility and aesthetics. (2) AIDITE Zr-block can be machined to dental restorations by all kinds of milling systems!
(3) Currently we mainly offer two material as :
HT Zr -- Normal translucent zirconia, applied for crown and bridges
ST Zr -- Super translucent zirconia, applied for crown and bridges especially for full contour crown and bridges
(4) All above products are CE, FDA, SFDA and ISO13485 cerified. 2. Specifications:
Zircon Zahn manual system | size(mm) |
AZ3 | 43*25*16 |
| 43*25*18 |
AZ3L | 43*25*22- |
AZ5 | 52*25*16 |
AZ7 | 65*25*16 |
| 65*25*18 |
| 65*25*20 |
AZ7L | 65*25*22 |
AZ9 | 75*36*16 |
| 75*36*18 |
AZ9L | 75*36*22 |
AZ12 | 87*56*16 |
| 87*56*18 |
AZ12L | 87*56*22 |
| 87*56*25 |
| 93*75*12- |
AZ16 | 93*75*16 |
| 93*75*18 |
| 93*75*20 |
AZ16L | 93*75*22 |
| 93*75*25 |
| 93*75*28 |
| 93*75*30 |
3. COA Specification Result ZrO2 % : 94-95 94.3 Y2O3 % : 4.95~5.35 5.27 Al2o3 % : 0.15~0.35 0.248 Sio2 % : Max.0.02 0.004 Fe2o3 % : Max.0.01 0.002 Na2O % : Max.0.04 0.013 Lg-loss % : 2.7~3.9 3.36 Crystallite Size % : Not specified 360nm 4. Certificates: Our aidite company have got all certificates including CE0029 certificates ISO13485 medical system FDA certificates KFDA certificates SFDA certificates TUV certificates 5.Picture:
6.