Specifications 1.Adapt to the 2.4 GHz IEEE 802.15.4 RF transceiver
2.Low power consumption
3.Small Size 16mm * 28mm Stamps package
This module default shipping model is external antenna and it can also be customized to PCB antenna. RF/layout –Adapt to the 2.4-GHz IEEE 802.15.4 RF transceiver –High receiver sensitivity and robustness –Programmable output power up to 21 dBm –Only power Can communicate –16-mm × 28-mm Stamps package –Suitable for system configuration in line with the worldwide radio frequency Rate regulations: ETSI EN 300 328 and EN 300440 (Europe), FCC CFR47 Part 15 (U.S.) And ARIB STD-T-66 (Japan) • Low power consumption –Active Mode RX (CPU Idle): 27 mA –Active Mode TX 20dBm(CPU Idle):166mA –Power mode 1 (4 μs wake-up): 0.2 mA –Power mode 2(Sleep timer running): 1 μA –Power mode 3 (external interrupt): 0.4 μA –Wide supply voltage range (2 V-3.6 V) • Microcontrollers –Excellent performance and low power code prefetch function consumption of 8051 microcontroller core –32,64 -,128,256-KB system programmable flash -8-KB RAM, has number holding capacity under variety of power supply –Support for hardware debugging Peripherals –Powerful 5-channel DMA –IEEE 802.5.4 MAC timer, general-purpose timer (A 16-bit timer, an 8-bit timer) –IR generation circuit –32-kHz sleep timer with capture functionality –Hardware support CSMA/CA –Support accurate digitization RSSI/LQI –Battery monitor and temperature sensor –7 inputs and configurable resolution 12-bit ADC –AES Security coprocessor – 2 Powerful USART supports a variety of serial communications protocol –18 general I / O pins (17 × 4 mA, 20 mA) –Watchdog Timer • Development Tool –CC2530 development kit –CC2530ZigBee®development kit –For the RF4CE CC2530 RemoTI ™ Development Kit –SmartRF™ software –Packet sniffer –Available IAR Embedded Workbench Application • 2.4-GHz IEEE 802.15.4 system • RF4CE Remote control systems (greater than 64-KB Flash) • ZigBee system(256-KB flash) • Home / building automation • lighting system • Industrial control and monitoring • Low-power wireless sensor networks • Consumer electronics • Healthcare Operating parameters Note:GB2530-L and the GB2530-H module the following parameters based on T = 25 ° C and VDD = 3 V measured, unless otherwise noted.
Pin Description
Dimension
package
Technical information &Datasheet please contact the customer service and download from our web site.thanks!