Product description
| YXT-TL40 Automatic double sides jar labeling machine |
| Labeling speed | 0-80b/min |
| Labeling precision | ±0.5mm |
| Label length | 50-500mm |
| Label width | 40-110mm |
| Bottle high | 50-350mm |
| Bottle diameter | 20-150mm |
| Power | 220V 50(60)Hz 1.75kw |
| Machine size | 2400*950*1200mm |
| Weight about | 700kg |
| Apply field | glass and plastic round bottles |
Functions: (1)All mechanically operated design with all transmission mechanism in enclosed oil-bath thus ensures smooth,quite,Low noise of the red wine labeling machine (2)Conceyer load lower top surface and turn table made of stainless steel for durability and ease in cleaning. (3)Good for both indicidual operation and connection ling. (4)Small floor place.Compact and easing move-able with Casters. (5)Most suitable for small standard of round bottle labeling in chemical. (6)Pharmaceutical food and beverage industries.The print unit can be added to the product according to the users need. Operating principle: This machine adopts the design first in stick mark scalloped turned pole again by rubber wheel stick take a few glue and then to label transmission device in sticky get a tag,to vacuum suction paper roller position,by off label grasp take off label.At the same time will label switched to vacuum sheet transfer belt,use the vacuum suction,make tags adhere to the sheet transfer belt into the labeling area,make tags enclosed by chain coveyor esther in the bottle.So circulates movement,the complete machine production process. Operation procedure: (1)Using manual machine,again affirmatory roulette move and the adjustment of various spare parts in the correct position. (2)Place glue and tag:put a label first label fan shape,after finishing in tags within the transmission device. (3)System power on. (4)Sure air pressure is normal or not. (5)Press the vacuum switch. (6)Will point start/continuous concersion switch twist to the piont start position in press host switch make glue adhesion fan-shaped turn stern. (7)Will products(bottle)placed in a conveyor belt. (8)Contact switches must and switch indicator lamp also bright. (9)Wil piont start/continuous conversion switch twist to continuous position in press host switch began to work. (10)Determine whether attached with a right,if not ideal may engage in trace adjustment. (11)Check the bottle and tags into labeling place time is correct. (12)Suction paper roller and fan-shaped turned pole in attached with a stick,whether have taken different sound.
