YE-100 Compressive Strength Of Brick pdf

Brief Introduction: 
This series machine is mainly used for building materials test the flexural strength test, including aerated blocks, cement, plastic sand and other building materials compression strength test. The machine uses hydraulic load, electronic force, with a load digital display, the load rate display, the maximum load to maintain, as well as overload protection and power data retention and other functions.
Technical specification:

Model	YE-100
Maximum test force(KN)	100
Test power accuracy	Better than the indicated value 1%
Hydraulic pump rated pressure	25Mpa
The maximum spacing between the upper and lower platen	230mm
Piston diameter and maximum stroke	φ125mm×80mm
Motor Power	3 phase 7.5 Kw
Dimensions (L × W × H)	850×620×1340mm
Net Weight(kg)	4000

Structure description:
Hydraulic system
The oil in the tank is filtered through the oil sump after being pumped into the oil pump. When theoil input valve is closed, the piston is pushed out due to the oil pressure, the oil flows back from the oil return tank, When the oil input valve open, the oil through the tubing into the working cylinder, and then through the pressure tubing through the return valve body flow back to the tank.
Control system
This machine adopts hydraulic loading, electronic measurement, LCD display, loading speed display, Max loading value maintained, overload protect and Power data retention fuctions.
Protection system
When the test force exceed 3% of Max. Test force The machine is overload protection.The pump and motor stop work.

Configuration : 

Testing machine frame	1 set
Oil pressure transducer	1 set
Digital control box	1 set
Electronic control system	1 set
Accessory	1 set

CONTACT ME: