Wireless Emergency Button with One Red Button

Specifications Wireless Intelligent Power Switch Controller

wireless electronic switch

control the switches without direction limitation

Wireless Intelligent Power Switch Controller - 3 Touch Buttons   PE-8906 is wireless electronic switch which adopts wireless RF technology and control the switches without direction limitation. Each switch has  specific ID address. The effective distance between the switch and the remote control is more than 50m. This device can also work with control panel, it can be controlled by both the control panel and remote control.   Features: Input voltage: 220V AC Power consumption: 2W Max current capacity: 2A Max power capacity: <500W Operation mode: wireless remote control or manual Effective distance: >50m Stable performance / easy to install Wireless emitting frequency: 433MHz Dimension is 87*87*45mm / ivory white color Jumper Switch Instruction:                       MODEL 1, MODEL 2 and MODEL 3 are programmable jumper, setting the work mode Short circuit model: when power off, the switch keep the turn on / off status as set; Open circuit model: when power off, the switch turn off automatically.  Button Function Instruction: Operation: press the button for turn on / off, meanwhile the LED turn on / off; Register the electronic switch to control panel (when MODEL 5 set as “Open Circuit”): press the corresponding button for more than 20 seconds then release, it will send signal to control panel (at this time corresponding LED will twinkling) Notice: pressing button time should be more than 20 seconds, otherwise the registration will be invalid. Register the electronic switch to the remote control: press all the buttons for more than 20 seconds (at this time all LED will twinkling), then release (all LED twinkling by turns). Press all the buttons and trigger the remote control. Repeat the process to register next remote control (total 48 remote controls can be registered). Delete the registered electronic switch: press all buttons for more than 60 seconds, all LED twinkling fast, then electronic switch will delete the registered code.