Wire Rope Electric Hoist

This wire rope electric hoist is a universal lifting equipment. The wire rope electric hoist is fitted on single girder crane, overhead crane, gantry crane, jib crane or I/H beam steel structure. With slight modification, this wire rope electric hoist can be also used as winch. Wire rope electric hoist is commonly used at factories, mines, harbors, warehouses, cargo storage sits and shops. 

Model CD wire rope electric hoist runs only with 1 working speed, which can satisfy normal application. While model MD hoist has 2 working speeds: normal and low speed. With low speed, it can do precise hoisting work such as loading and unloading, mounding of sand box, maintenance of machine tools. The lift height can be customized such as 6m, 9m, 12m.

Installation&Commissioning:

1. The trolley installation should be adjusted according to the width of the I-beam track with washers to ensure that the clearance between the wheel edge and the track is 4-5mm;

2. Installation, wiring and commissioning of the lifting weight limiter;

3. Installation and commissioning of the limiter (the limit is adjusted upward, the top of the hook and the drum shell are kept about 200mm space, when the limit is lower, the remaining total safety wire rope on the drum is kept at least 2 laps);

4. Check the refueling amount and oil quality of the reducer;

5. Inspection and adjustment of electronic brake;

6. Check and ensure the wiring inside the control box is firm, ensure the insulation resistance is normal, and ensure the cable wiring from the control box is correct;

7. Check and make sure the wedge and wedge sleeve are installed firmly;

8. Check and make sure the wire rope is normal, to avoid bending, corrosion, broken wire;

9. No-load test run and load test run.

Homepage: https://www.weihuacranefactory.com

http://www.weihuacraneglobal.com

E--mail: weihua(at)craneweihua(dot)com