white quartzite ledge stone

white quartzite ledge stone Size: Abonomity
Color:White
Used: Exterior and Interior Wall
Brand:Lvjia artificial Cultural Stone for exterior wall construction     Man-made art stones, also known as man-made cultural stones, are made of clay, cement, and imported fastness pigments by hands. They are high intensity, low specific gravity, light weight, easy installation, waterproof, colorful, UV resistant, non-radioactive compared with the natural stones. The above characteristics make them widely used for internal and external wall decoration in gardens, villas, clubs, theme parks, residential homes, golf course and other buildings. The man-made cultural stones can show the variety of cultural connotations and natural styles, so that they enable people to have a relaxed mood of returning and tasting the nature while enjoying the aesthetic pleasure, to achieve the attractive and practical situation. They are the best materials to replace the natural stones and slates   The man-made art stones (man-made cultural stones) can band together with the circumjacent surrounding, enable each stone to reflect the effect of nature, to meet peoples living concept of advocating nature and returning to nature. Their clear vein, delicate dense texture, and elegant tone make formal, elegant, harmony in whole and changes in details combined perfectly.  The rich original flavor, fresh and simple, gives the unique personality for the buildings; the rough and riot can integrate into the idea and concept of the designers; the multi-level combination and changes also make the surfaces more colorful visual sense and enable the buildings to be much more poetic.   Installation Guide: Preparation for the Wall First to confirm the strength of the wall to meet the construction requirements, for the low water absorption rate walls  such as wood, plastic, you can use barbed wire reinforcement. Cleared before the construction of the wall surface, floating dust, debris, smooth wall should be firstly processed into a rough surface. Water the wall one day before the construction and wet the wall again pre-construction.    Preparation of the eco-art stone Pre-place the products on the floor before paving to confirm the effect. Adjust the overall balance and aesthetics in advance. Such as: small pieces of stone should be placed next to the large stone; convex surface next to the flat surface stone; thick stone next to the thin stone   Blending the bonding material
Using more than 425 white cement, ordinary Portland cement (cement: sand: 801 glue = 1:2:0.03 or      cement: sand: water = 1:1:0.4) .  Regarding cement, please use Portland cement or ordinary Portland cement. Sand should be clean meeting national standard 2mm or below.  Water, use clean tap water. Mortar evenly and put it on the wall.  In order to prevent the bonding material solidified before installing the art stones, the area of the bonding materials in the stone must not exceed 0.5m2-1m2, and the thickness control in about 2mm-3mm. Full wet the art stone, and then place the bonding materials in the back of the art stone, wiping more in the middle and less in the corners.(the average thickness of the bond materialpaste is about 4mm-6mm).    Installation The corner stone should be installed first. And the long stone should be installed next to the short stone. After installing the corners, install the other tiles from the edge to the center. When install the same size of tiles, please choose the tiles from 2 or 3 different cartons, in order to make the colors fit perfectly. Please full paste the stones to the wall, and make sure the bonding materials overflow from the back of the stone.    Adjust the Dimension The size of the stone can be cut into smaller ones,in order to make a good effect. When cutting the stones, cut from the place where is weaker. The debris can be installed between the big stones.   Mortar Joint  The bricks should be installed by the shape of "T". The width of the mortar joint is about 8mm~10mm. When installing the uneven shapes of stones, the width of the mortar joint should be less than 20mm. The mortar joint materials should be used in time before it being too dry. (If too dry, it is hard to install and easy to craze. If too wet, it is hard to cover the overflowed bonding material) The time for the mortar joint materials become dry is different from different wall and climate. Use the sticks to scrape off the redundant part and press tight. Then use the brush to make the surface plain. If the art stones stained with the mortar joint materials, they should be cleaned in time.   Notice Don't install in the extremely cold temperature. Don't install in the sun.( A awning is recommended) Do confirm the water percentage of the wall before installation.(If the wall is too dry, it will absorb water from the bonding materials and mortar joint.) Or the bonding material and the mortar joint will break off. More Products:                ...