1 / 1
Model No. : | WCL |
---|---|
Brand Name : | Longie |
Product description
Dimensions of Lifting Bottom-plate: | 1426mm x 958mm | |
Overall Dimensions: | 1768mm x 1285mm x L | |
Maximum Lifting Height: | MAX 6000 mm (the distance from the lifting platform to the ground) | |
Minimum Height (Lifting Bottom-plate) | 80mm(to the ground) | |
Entry & Exit Mode: | 0°, 90° or 180° | |
Lifting Speed: | 40mm/s (screw), 70mm/s (hydraulic) | |
Maximum Carrying Capacity: | 350KG | |
Control voltage: | 24V/DC | |
Motor Power: | 1.1KW, 2.2KW, 220V/AC | |
Power Supply: | 220V/50HZ/25A | |
Hydraulic Lifting system: | Chinese Famous Brand | |
Drive System: | Hydraulic | |
Running Mode: | Jogging Control or automatic control | |
Lifting Control: | Adopts “Operation by self-resetting switch of wane | |
Overload Protection: | Over-current relay control | |
Guard plate form | 90°or 180°, switching equipment | |
Table platform | Aluminum anti-skidding plate with patterns | |
Overall Painting: | Static blasting painting | |
Case Panel: | Aluminum alloy plate (static electricity spray plastic) | |
Working Angle of Safety Ramp: | 75° | |
Fit Application | Indoors and outdoors | |
Working Temperature: | From -20°C~60°C | |
Installation Mode:
| Non-base pit installation, directly fixed on the concrete ground (when there is no pit for outdoor using, the concrete ground below the platform shall not be lower than the neighboring ground.) | |
Extra control Device: | The calling box shall be installed in the neighboring wall of the upper/lower layer of the equipment and remote controller shall also be used for options. | |
Emergency Stop: | The ascending/descending process of the machine shall be controlled by pressing the emergency button. | |
Manual Operation: | The lifting bottom-plate shall manually descend when the manual hydraulic valve is open or manually rotates the screw. | |
Safety Device:
| Safety Interlocking | The lifting platform shall not run if operates improperly. |
| Safety edge: | The operation must be stopped immediately the safety edge meets ob stacles during operation. |
| Emergency Descending | When there is no power or malfunctions, manually descend the device. |
|
Safety Ramp: | The wane shall up warp during lifting process. |
Send your inquiry to this supplier