Specifications Highly symmetric pore structure
High dirt holding capacity
Good chemical compatibility
Inherently hydrophobic
Product Description water filter cartridges depth filtration SS housings filter cartridges are designed for general purpose use wherever a cost effective membrane filter is required. Constructed entirely from polypropylene it is and ideal cartridge for chemical and solvent resist applications in the pharmaceutical and general fine chemical industries. Polypropylene membranes are also suitable for venting applications where a cost effective hydrophobic memebrane is required. Key Features water filter cartridges depth filtration SS housings filter cartridges have advanced features as followings: High chemical resistance- all polypropylene construction pleated membrane media for maximum media for maximum efficiency High filtration surface area for high flow and low clean pressure losses All sizes from 10" to 60" in modular construction are available in our factory Absolute ratings 0.1μm and 0.2 μm Cost effective versus PTFE membrane Thermal bonded construction eliminates adhesives and ensures minimal extractables Liquapure filter cartridges' identification design , increased cursh-resistant, and elegant appearance, identification on every cartridge for full traceability FDA compliant materials Available with all standard end cap configurations and seals Technical Data: water filter cartridges depth filtration SS housings filter cartridges have advanced technical datas : Typical flow rates: 0.1μm 3 it/min/69mBar 0.2 μm 11 it/min/69mBar Pre flushed with 17 megohm-cm water Hot water sanitisable@90℃ Maximum pressre loss: Forward 3.4bar @ 20℃ Reverse 2.7bar @ 20 ℃
water filter cartridges depth filtration SS housings filter cartridges have advanced technical datas and Specifications:
Dimension And Structure | Length | 9.75”, 10”, 19.65”, 20”, 29.5”, 30”,39.5”, 40” |
ID | 30mm |
OD | 68mm |
Effective filtration area | 0.60m² - General & beverage industry, pharmaceutical & biological industry |
Materials Of Construction | Filtration media | Polypropylene membrane |
Support layers | Polypropylene |
Core and Case | Polypropylene |
O-ring and Gaskets | Silicone, EPDM, Viton, TEV |
Operating Conditions | Maximum different pressure | 36.3 psid / 2.5 bar at 60 |
69.6 psid / 4.8 bar at 30 |
Maximum operating temperature | 176°F / 80℃ |
Pre-rinsing and Rinse-up | Cartridge will rinse-up to 18 megaohm- cm with a minimum of throughput |
water filter cartridges depth filtration SS housings filter cartridges related products: Hight flow filter cartridges Full length filter cartridges Oil filter cartridges Pleated filter cartridges Multi filter housings SS membranes etc Welcome to visit Shanghai Liquapure filtration Co.,ltd , we will service for you sincerely