Product description
Characteristics:
- High weathering and water resistance
- Good adhesion, paint film is tough
- Good color retention
- Quick drying
Product description: single component waterborne acrylic (modified) paint for steel structure building
Performance features:
- Can be applied directly on rusty steel (rust layer ≤50mm)
- Single component
- Completely water-based eco-friendly
- Quick drying high coverage
- Color and appearance: gray or more
- Coating thickness:53, ±5mm
- Solid content: 65, ±3%
- Density: 1.2G/³ Voc ≤50g/L
- Primer dry time (≤ 50%r. H.)
- Temperatures: 20, 25, 30, 35 and 40°C
- Surface dry: 35, 25, 20, 15, 10 minutes
- Hard dry: 42, 36, 30, 24, 18hrs
- Primer may dry quicker in operation, please still follow this instruction
- Theoretical coverage: 12m²/L or 10m²/kg
- Over coating interval: minimum 4 hours, maximum unlimited
Recommended substrate conditions and temperature:
- Remove all oil or grease, soluble contaminants and other foreign matter
- All surfaces to be coated should be clean, dry and free from contamination
- If applied on the rusty surface, the rusty layer thickness should be below 50mm, other than the bottom surface processing requirements, without acid and sandblasting processing. catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
- Apply in good weather, don't let coating contact any liquid like water or other solvent before completely dry. No painting is carried out in rainy day outdoor
- If the humidity is above 85% please stop painting
- The temperature of substrate should be above 5 degrees
- Lower temperature might not dry or cause a long time to dry
Air spray:
- Nozzle orifice: 1.5-2.5mm
- Nozzle pressure: 0.3-0.5MPa
Airless spray:
- Nozzle orifice: 0.4-0.5mm
- Nozzle pressure: 12-15MPa
- Brush: use soft brush
- Recommended finish: RSL series
- Storage temperature: 5-30°C in well ventilated warehouse
- Stir thoroughly before painting
- Don't use any steel or other metal stick to stir the paint
- It will affect the quality of this product
Applicable fields:- Shipbuilding, steel structure, machinery, oil storage tank, container, petrochemical pipeline construction, pipeline, railway locomotive, automobile chassis, bridge, boiler, airport industry and more
High weathering and water resistance
Good adhesion, paint film is tough
Good color retention
Quick drying
Can be applied directly on rusty steel (rust layer ≤50mm)
Single component
Completely water-based eco-friendly
Quick drying high coverage
Color and appearance: gray or more
Coating thickness:53, ±5mm
Solid content: 65, ±3%
Density: 1.2G/³ Voc ≤50g/L
Primer dry time (≤ 50%r. H.)
Temperatures: 20, 25, 30, 35 and 40°C
Surface dry: 35, 25, 20, 15, 10 minutes
Hard dry: 42, 36, 30, 24, 18hrs
Primer may dry quicker in operation, please still follow this instruction
Theoretical coverage: 12m²/L or 10m²/kg
Over coating interval: minimum 4 hours, maximum unlimited
Remove all oil or grease, soluble contaminants and other foreign matter
All surfaces to be coated should be clean, dry and free from contamination
If applied on the rusty surface, the rusty layer thickness should be below 50mm, other than the bottom surface processing requirements, without acid and sandblasting processing. catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
Apply in good weather, don't let coating contact any liquid like water or other solvent before completely dry. No painting is carried out in rainy day outdoor
If the humidity is above 85% please stop painting
The temperature of substrate should be above 5 degrees
Lower temperature might not dry or cause a long time to dry
Nozzle orifice: 1.5-2.5mm
Nozzle pressure: 0.3-0.5MPa
Nozzle orifice: 0.4-0.5mm
Nozzle pressure: 12-15MPa
Brush: use soft brush
Recommended finish: RSL series
Storage temperature: 5-30°C in well ventilated warehouse
Stir thoroughly before painting
Don't use any steel or other metal stick to stir the paint
It will affect the quality of this product
Shipbuilding, steel structure, machinery, oil storage tank, container, petrochemical pipeline construction, pipeline, railway locomotive, automobile chassis, bridge, boiler, airport industry and more