Product Features:
In
the working flow, the metal pressing block is fed into the forced
feeding and crushing port of the equipment through the feeding device,
and the metal pressing block is primary broken by the crushing process
of the pressing roller and the coarse crushing shaft, The metal pressing
material after primary crushing enters the main engine cavity of the
equipment, and under the drive of a high speed and high torque motor,
the hammer head on the rotor of the main engine takes turns hitting the
metal pressing material entering the main engine cavity through the
space between the lining plate and the hammer head, When the crushing
block can be fully and effectively broken in the crushing chamber, the
crushing block can be torn into a fragment in accordance with the
specifications, and then flow down from the screen. The broken material
is separated by an air rotary sorting system, and the paint, rust and
waste plastic in the metal press block are separated, and the material
unloaded at the bottom of the equipment is then transported to the
aggregate point through the conveying equipment, In this process, the
non-magnetic materials contained in the materials are separated and
unloaded from the production line to the non-magnetic materials pile
under the action of the magnetic separator.
In addition, the whole
system is equipped with dust removal device to minimize the harm of dust
pollution in the production process. The equipment mainly has the
advantages of high output, low energy consumption, high efficiency,
uniform discharge and so on. When the equipment is used, the noise is
low, there is no pollution, the operation is simple and the maintenance
is convenient.
Product Instruction:
Metal
crusher is mainly used to realize the decomposition and crushing of
large mouth waste metal, and to realize the fine crushing of waste
metal, so as to achieve a better benefit prospect in the transportation
cost and recovery price of waste metal. This series of equipment is a
kind of multi-purpose and high efficiency metal kneading ball equipment
produced by our factory. it can be used to achieve good paint removal
effect and granulation effect whether it is used in end-of-life cars or
waste cans.
In the
working principle of the equipment, the metal pulverizer makes use of
the basic principle of the hammer strike, under the drive of the high
speed and high torque motor, the hammer head on the rotor of the main
engine takes turns hitting the material to be broken into the cavity,
through the space formed between the liner plate and the hammer head,
Tear the debris to be broken into pieces in accordance with the
specifications. According to the working condition of the crusher, it
can be divided into dry system, wet system and semi-wet system.
Dry
system mainly means that the broken material must pass through the air
rotary sorting system to separate the metal and non-metal, in addition,
the whole system is equipped with dust removal device. Wet system is to
spray water at the same time of crushing, and to wash with water at the
same time of sorting.
The
semi-wet system only carries out a small amount of water spraying when
the crushing needs, to prevent dust, and there is no cleaning. As a high
quality equipment for scrap metal crushing treatment, metal crusher can
greatly improve the disassembly efficiency of waste metal in terms of
investment value, and at the same time enhance the purity of waste iron
and steel to provide high quality burden for low cost smelting of scrap
metallurgy industry.
Metal
crusher series products mainly include: easy to pull can grinding,
color steel tile crushing, scrap car crushing, paint barrel crushing,
iron chip crushing and other series of products can be used for a
variety of waste metal recycling crushing processing.
Pre-sale:
(1) selection of equipment type.
(2) Design and manufacture products according to the special requirements of customers.
(3) training of technical personnel for clients.
(4) The company plans the site for the user free of charge, designs the suitable process and the plan.
On sale:
(1) acceptance of the product.
(2) assisting clients in the preparation of construction plans.
After sale:
(1) assign special after-sales service personnel free of charge to guide customers to install and debug.
(2) installation and debugging of equipment.
(3) on-site training of operators.
(4) after the installation of the complete set of equipment, the
full-time technical personnel may assist the customer in on-site
production until the user is satisfied.