Wallboards in frame structure

           The general framework of housing construction is divided into steel frame and reinforced concrete frame structure, the stress is characterized by most of the load bearing frame beam and frame column and transferred to the base, the middle of the frame is not load-bearing wall. Light Wallboards is non load bearing wall, suitable for filling in this kind of frame structure in the wall, from the construction process and construction period of two elements of comparison, combination of frame structure with light Wallboards component combination is better than that of frame structure and block.

  Product specification:

Advantages of MengHe wallboard products:

(1) Long service life:

        It used to build permanent house for at least 50 years. This product is the best alternative to traditional wall materials.

(2) Environmental protection:

        The raw materials used in wallboard do not contain harmful substances. Product has no radioactivity.

(3) Fire prevention:

        Combustion performance of the national A-level standards.

(4) Waterproof:

         Products in the absence of any water treatment, made into a pool. The back of the wall kept dry and impervious.

(5)Sound insulation:

        The wallboard has good sound insulation effect. The wall thickness of 100mm is 36dB.

(6)heat preservation:

       The wallboard has a good thermal insulation function, in cold and hot areas with obvious effect. It can reduce the energy, consumption of heating, refrigeration and air conditioning.

(7)Good mechanical properties:

        The experimental data of compressive strength of the product reached 5.9Mpa, 1.6 times higher than the national, standard, bending failure load of more than 1.5 times the weight of the wallboard, the impact resistance is greater than, the impact of the 5 times 30kg heavy sandbags, no crack.

(8)Quick and simple construction:

        When the product is installed, the utility model does not need water, and has the advantages of simple structure, convenient installation, free cutting, adjustable length and width, and low material loss. After the completion of the construction of the wall does not need to be plastered, can be directly wallpaper, latex paint and other decorative. Not only reduce the amount of work, but also greatly shorten the construction time.

(9) Increase the use area:

         100mm thick wallboard can be replaced by 150mm thick block walls, thickness reduction of 50-80mm compared to 10 meters per wall extension, can increase the use area of 0.5-0.8 square meters.

(10)Save project cost:

Compared with brick walls, Both labor and material saving, but also reduce the weight of the wall body, without       plastering, directly reduce the cost of project.

Product pictures:

Packaging and transportation:

Our services:

1.Our well-equipped facilities and excellent quality control throughout all stages of production enables to quarantee total customer satisfaction.

2.Provide construction, after-sales service and technical support for customers.