1 / 1
Model No. : | IDrive 100 series frequency inverter 50hz to 60hz |
---|---|
Brand Name : | ISTECH |
Product description
Item | Item Description | |
Input | Rated voltage: frequency | 220V, 380V, 50Hz/60Hz |
Allowed voltage working range | Voltage: 220V±15%,380V±15% Voltage unbalance rate: <3%; Frequency: ±5% | |
Output | Voltage Range | 0-380V/460V |
Frequency range | 0Hz-650Hz | |
Overload capacity | General type(G type): 150%Rated current 1 minute; 200% Rated current 0.5s Fan water pump Type(P type): 120% rated current 1 minute |
Modulation Way | Magnetic Flow Vector PMM Modulation |
Speed adjustable range | 1:100 |
Starting torque | When it is 0.5Hz, it is 180% Rated torque |
Rotating speed of operation/Steady state precision | ≤±0.5% rated Simultaneous rotating speed
|
Frequency Precision | Digital Setting: ±0.01%×highest frequency; simulation setting: ±0.2×highest frequency |
Frequency Resolution Ratio | Digital setting: 0.01Hz; simulation setting: highest frequency ×0.1% |
Torque improvement | Automatic torque improvement, manual torque improvement 0.1%~30% |
V/F Curve | Four ways: one way: user sets V/F curve, three ways: lower torque characteristic curve( 2.0 power, 1.7 power, 1.2 power) |
Fixed length control | When reaching set length, drive stops working. |
Droop control | Suitable in many drives driving the same load occasion |
Tone adjusting | Adjusting tone of motor in operation |
Instantaneous stop without stopping working | When instantaneous power down, through bus voltage control, ceaseless operation can be achieved. |
Binding function | Run command channel and frequency given channel can be bound casually and switched over simultaneously. |
Operation command channel | Given operation panel, given control terminal and given serial port can be switched off in many ways. |
Frequency given channel | Number given, analogue voltage given, analogue current given, pulse given, serial port given, can be switched off in many ways. |
Auxiliary frequency given | Realize flexible auxiliary frequency fine tuning, frequency synthesis |
Pulse output terminal | 0-50Hz pulse square wave signal output which can realize output of physical quantity of set frequency and output frequency. |
Analogue output terminal | 2 ways analogue signal output, 0/4~20ma or 0/2~10V can be chosen respectively; the output of physical quantity such as setting frequency, output frequency can be realized. |
Send your inquiry to this supplier