US UK EU plug 24V 1A PoE adapter 24W 24V POE adapter for Access point

US UK EU plug 24V 1A PoE adapter 24W 24V POE adapter with CE RoHS for Access point For Example: EU 24V 1A POE Adapter for Access point   This product is a Power Over Ethernet (AC TO DC power transfer device) ,it can provide for a
24W (24V DC 1000mA) single DC output with constant voltage source, it covers all the related
electrical, mechanical, environmental and safety aspects.     Product description: Electrical 2.1 Input Voltage (AC)       From90 - 264Vac Maximum.
2.2 Input Frequency Range
      47 Hz(min) ~ 63 Hz(max)
2.3 Input In-rush Current.
     50A Max at Cold start@25℃, AC input 220V and dc output full-loading.
2.4 Input Current.
     a. 0.8A Max at 90V ac
     b. 0.5A Max at 264V ac
2.5 Hold-Up time.
     7mS minimum at dc output full loading and 115 Vac 50/60Hz input.
2.6 Input wattage at output no-load / minimum-load condition.
      Less than 0.5W Pin DC output load and 240Vac input voltage and frequency condition.
2.7 Efficiency.
      80% minimum at DC output full loading and 115/230Vac input voltage range included dc
      output cable voltage drop loss.
2.8 Safety Test.
    a. Leakage current less than 0.25mA at 264Vac, 50Hz.
    b. Hi-Pot test : 3000Vac, 10mA, 3Sec between Primary to Secondary ground.
    c. Insulation : at dc 500Vdc,1 Sec between Primary to Secondary circuit, IR shall >=50MΩ.   2.9 Ripple and Noise.
     Low frequency ripple ( < 100KHz ) <= 150mVpp, and Total composite Ripple and Noise.
     Less than 120mVpp, tested by dc loading side parallel with a 10uF/EC(C2) and
     0.1uF/Ceramic(C1). Capacitors and Measured Band-Width with DC-20MHz.   2.10 Over-Shoot and under-shoot.
      Less than 10% of nominal Voltage value.
       a.1.2A (the condition of 100Vac input)
       b.1.5A (the condition of 240Vac input)
2.11 Protection.
      a. SCP: For short circuited protection and with auto-recovery function.
      b. OVP: Over-voltage protection with dc output voltage shoot down will be than less27Vdc.
2.12 Rise time.
      The output voltage should rise from 10%~90% volt and settle within regulation in less than
       20 msec from apply of AC input voltage condition.
2.13 Output voltage Temperature Coeffience.
        Less than 0.5%/C.   3. Environment.
3.1 Temperature
   a. Operation : -10 to 40 ℃
   b. Storage : -30 to 80 ℃ 3.2 Humidity
   a. Operation : 10 to 95%
   b. Storage : 10 to 95%
3.3 Altitude.
     From sea level to 10,000Ft (operation) and 40,000Ft (Non operation)   4. EMC   5. Reliability 5.1 .Life.
    a. Average life expectancy of 5 years. 8(H)×300(D)×5(Y).
    b. Environment Ambient: 25℃
5.2. M.T.B.F.
    30,000 Power On Hours at 25℃  5.3 Temperature Rise.
    Less than 45℃ at nominal AC input / DC output full loading and environment
    temperature 25+/-1℃ on Top/Bottom of plastic case.
5.4. Burn-in.
    100% Burn-In with 80~100% loading & 35~45℃ Environment temperature .
5.5. Vibration Test.
    a. Non operation vibration with shipping container shall be 2G'S peak, 7-50Hz, 4G'S peak
        50-500Hz, after test no abnormally to be found.
    b. Operation vibration shall be 0.5G'S peak, 10-60Hz, 3 Axes, after test no abnormally to be
        noted.
5.6. Drop-Test.
      The product to be droped from 1000mm height onto a concrete floor covered with 20mm
      vinyl tile one times from 3 different surface(X-Y-Z),after test,the switching power supply is
       not broken, disassembled, or damaged to access hazardous parts.   6. MECHANICAL CHARACTERISTICS.
6.1 Dimension: 84.0mm(L) * 47.0mm(W) * 69.0mm(H) Weight : 107 gram
6.2 AC Inlet: 2PIN GS plug.
6.3 Case Material: NORYL (PC,PC+ABS,or equivalent),94V-0, Color;Black
6.4 Output Plug: RJ45-2 ( LAN-DATA IN,POE-DATA&POWER OUT)   7. OUTLINE DIMENSIONS(Unit:mm) NOTE: 1. Case cover & chassis material PC: BLACK
             2. AC PIN MATERIAL: BRASS (NI PLATED)
             3. Tolerance: ±0.2
             4. Case cover: NO company LOGO   8.LABEL DIAGRAM. NOTE: 1. MATERIAL: POLYESTER+PVC; COATING: 0.25+-0.05mm
             2. SILVER characters BLACK background
             3. LEAD FRE
             4. Tolerance: ±0.1   9. Packing Drawing(Unit: mm). White Box: Material: 400g Dimensions (L*W*H): 90*50*70 mm Q’ty: One Box/PCS   Contact Us Shenzhen ZhangQing Electronic CO LTD

Founded Year	2010
Located City	Shenzhen, China
Main Products	PoE switch/injector/adapter/splitter/tester, Power supply
Usage	Access Point, IP camera, VoIP phone, etc.
Main Market	West Europe, North America, etc.

CONTACT US Skype:  ben.chen_10