Upright Sigma Profile For Warehouse Making Machine
Upright sigma profile now it is quite popular for making pillar of upright or support, normally there are heavy duty type. Normally speaking, it is used together with the beam box. The material thickness is normally from 1.5 to 3.5 mm. The following drawing profile is for your reference.
Here is the Upright racking roll forming machine working process for your reference:
Hydraulic De-coiling---Material guiding---Levelin---Hydraulic punching---Roll forming---Length sizing---Cutting the panel---Panels to the collecting platform---Finish
Main composition of the upright pillar storage rack roll forming machine
The machinery line consists of 5.0 tons hydraulic de-coiler , material guiding , leveling , hydraulic punching , forming roller system, hydraulic cutting system ,run-out table, control cabinet with PLC.
Technical parameters:
• Matching material: G.I or M.S
• Material thickness range:1.2-1.8mm
• Main motor power: 15kw
• Forming speed:1-3m/min(include punching and cutting time)
• hydraulic station power:22kw
• Quantity of stands:about 16
• Shaft Material and diameter:¢75mm, material is 40CR
• Material Of The Stations: Guide rail style
• Tolerance:3m+-1.5mm
• Way Of Drive:1.5 inch single chain
• Controlling system:PLC
• Total weight:about 8 Tons
• Voltage: 380V/ 3phase/ 50 Hz
• Size of the machine:L*W*H 11.5m*1.5m*1.2m
• Material of forming rollers:Gcr 15, coated with chromed treatment
• Material of cutter blade:Cr 12 mould steel with quenched treatment 58-62
Cutting and the Control Cabinet
Cutting of upright pillar racking frame roll forming machine:
1) Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start.
2) Material of blade: GCR12with heat treatment
3) Length measuring: Automatic length measuring
4) Tolerance of length: +/- 1.5mm
Control Box: Brand Panasonic
1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
2) Automatic length measurement:
3) Automatic quantity measurement
4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
5) Length inaccuracy can be amended easily
6) Control panel: Button-type switch and touch screen
7) Unit of length: millimeter (switched on the control panel)
Packing List details
1) 5 ton hydraulic de-coiler: 1 set
2) Main roll forming machine:1 set
3) Hydraulic punching system: 1 set
4) Hydraulic cutting system: 1 set
5) Hydraulic station: 1 set
6) Control box: 1 set
7) Hydraulic cutting: 1 set
8) Run-out table: 1 set
9) Punching mould: 1 set
10) Cutting mould: 1 set
Here are some finished product pictures for your reference: