UHMWPE High Temperature Filled Sheet

UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet                                             UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet   (Ultra  high  Molecular Weight Polyethylene) is a thermoplastic engineering plastic with the average molecular weight more than 6.0 million. (PE only has the molecular weight between twenty to two hundred thousand.) This kind of material with five top performance of high-wear-resistance, good-chemical resistance, low-temperature resistance, self-lubrication and high-impact resistance, which is regarded as a surprised engineering plastic of excellent comprehensive capacity and competitive price. 1.Abrasive resistance which always have in thermoelectricity polymer. 2.Best shock resistance even in low temperature. 3.Low frictional factor, and well sliding bearing material. 4.Lubricity( no caking, in adhesion) . 5.Best chemical corrosion resistance and stress craze resistance. 6.Excellent machinery process ability . 7.Lowest water absorption(<0.01%) . 8.Paragon electric insulativity and antistatic behavior . 9. Nice high energy radioactive resistance. 10.Density is lower than other thermoplastics (< 1g/m3). 11.Long using temperature range: -269°C--90°C.   1. Very high-wear resistance, seven times wear resistance than steel, four times than PTFE 2. Very high anti-impact resistance, two times impact resistance than PC, five times than ABS. 3. Good self-lubrication, the same as PTFE, better than steel and brass appended lubricating oil. 4. Good anti-corrosion resistance, it has very stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity. 5. Very high-inadhesion resistance, the surface of product hardly affixes other material. 6. Very high-impact resistance, ten times impact resistance than PA66, eight times than PTFE. 7. Good low temperature resistance, in liquefied nitrogen (- 196), it still has the prolongation. few other materials can reach to this performance. 8. Non-toxic and clean property, UHMW-PE, which is the material that Food and Drug Administration (FDA) and United States Department of Agriculture (ASDA) permit to apply in food and medicine fields. UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet UHMWPE sheet  Thickness: 3mm - 380mm 
 Max width: 2300mm 
 Length: Any length. 
 We can do machining CNC service.   This is our promotion product, please contact us ASAP. Our  UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet  or "Ultra High Molecular Weight Polyethylene" sheet has an exceptionally low coefficient of friction which offers superb sliding properties and is one of the best for wear/abrasion resistance.  UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet  is tough even at low temperatures, low weight, easy to weld but difficult to bond Ultra High Molecular Weight Polyethylene Sheet is a super engineering plastic that is probably not as well known as some other engineering plastics but can out perform its relatives in a number of important areas 2000mm x 4000mm, 1530mm x 3250mm 1500mm x 3500mm, 1500mm x 3000mm, 1200mm x 3500mm, 1200mm x 3000mm, 1030mm x 2250mm, 1030mm x 4250mm, 1000mm x 3000mm, 1000mm x 2000mm 1400mm x 3500mm 1500mm x 1500mm 1500mm x 3000mm 2300mm x 6100mm  Properties of UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet
UHMWPE Sheet has a few very important properties and the first would be its incredible resistance to abrasion. UHMWPE can out perform almost any engineering plastic for abrasion resistance and UHMWPE is probably one of the best materials for lining chutes and hoppers for products such as sand, concrete or any other highly abrasive moving product. Another important property of UHMWPE Sheet is it's incredibly low co-efficient of friction, this is one of the lowest of all engineering plastics and will produce components with a very high life span with very low drag. UHMWPE Sheet is resistant to many dilute acids, solvents and cleaning agents. Applications for UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet
Because UHMWPE has excellent abrasion resistance it is often used for lining chutes, hoppers and UHMWPE is also used for slideways and wear blocks in aggressive environments. UHMWPE Sheet is often found in food production environments where high volumes of containers need to be guided along conveyors or production lines. Because UHMWPE Sheet has very low moisture absorption, it is also found in some high demand areas of marine applications. UHMWPE is sometimes used in cryogenic components due to its low operating temperature abilities. Size availability of UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet
UHMWPE Sheet is commercially available in two common sizes of 2000mm X 1000mm and 3000mm X 1250mm, others we also can supply as above, UHMWPE Sheet is available in thicknesses ranging from 6mm thick up to and including 250mm thick. UHMWPE Sheet is available in natural which can also be described as white and then two other colours which are black and green. These two latter colours are usually slightly more expensive than natural grade Alternative options with  UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet
UHMWPE Sheet can be obtained in a regenerated grade that can offer almost identical performance to virgin grade UHMWPE Sheet but at a reduced price to help some projects that are on a budget. Technical Data
UHMWPE Sheet has a maximum operating temperature of 90°C and a short term operating temperature of 120°C. UHMWPE Sheet has a tensile strength of 17MPa and a ctystale melting point of 135°C. UHMWPE has a water absorption figure of 0.02 at saluration and a co-efficient of friction of 0.15 We have large stocks of UHMWPE and can offer UHMWPE at excellent prices with free next day delivery. Company advantages 1.the quantity of our presses is the most in UHMWPE industry 2.have a long history of nearly twenty years,so we have rich experience and technology in UHMWPE industry  3.we designed the presses by ourselves with special two machines recycled which can reduce the time production. 4.we have our own laboratory,have the most excellent sales people,have our own technique department and supplies products all over the world to many large customer. UHMW-PE sheet,  Marine fender UHMW-PE pad,  Outrigger pads/Crane mats,  HDPE sheet/ rod,  TRACK MATS ground protection,  UHMW-PE chain guide,   CNC machined UHMW-PE wear part,  UHMW-PE liner, Cutting board,  Paper machinery dewatering elements,  Safety yellow trailer plates,  UHMW-PE dock bumpers,  UHMW-PE Drag flights,  UHMW-PE Pulley/roller,  PVC (polyvinyl chloride)sheet,  Nylon sheet/rod PTFE sheet/rod,  PP (polypropylene)sheet, track pad for milling machinery/excavator Company Name: Shandong Ningjin Xinxing Chemical Co., Ltd  TEL: 86-0534-5222377  FAX: 86-0534-7074626  skype: sdxxhg518   Website : www.sdxxhg.net   UHMWPE High Temperature Filled Sheet,  High Temperature Filled UHMWPE sheet  in sizes and colors  Added Information for UHMWEP marine fender facing pad:   (1)  The SPC Fender is the result of continuous product development. This fender design is based on the Cone Fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Its refined geometry and conical shape result in a number of outstanding performance characteristics which include:
Exceptional good energy absorption to reaction force ratio (E/R) Outstanding energy absorption per weight of fender Very good inherent resistance against shear forces due to its geometry and self-centering characteristics No reduction of energy absorption up to 10° compression angle Internal overload stopper as standard  (2) The CSS fender is a well established fender type. This fender has a hollow cylindrical body with fully rubber-imbedded mounting flanges and is designed to deflect in an axial direction. Cell fenders are very robust and have been used for decades in many ports around the world. Good energy absorption to reaction force ratio (E/R) Integrated and fully-embedded fender flanges make assembly & installation simple Good shear force resistance due to the large diameter of the fender flanges Large fender footprint with good force distribution could lead to relative light panel construction Availability in heights between 400 and 3.000 mm, each in 3 different main hardness grades (Intermediate rubber grades are available upon request) for the most precise fender selection.  (3) Element fenders are fully moulded rubber legs with embedded mounting plates. In principle they are based on V-fenders but separated legs increase fender layout flexibility when installed behind steel panels, UHMW-PE low friction plates or where mounting space is restricted. Good energy absorption to reaction force ratio (E/R) High energy absorption per weight of rubber Modular and compact design with small footprint Vertically and horizontally mounted elements may be combined in one system Aavailable in heights between 250 and 2.000 mm, in standard lengths ranging from 500 to 2.000 mm each in 3 main hardness grades.(Intermediate rubber grades are available upon request) This enables the most precise fender selection.  (4) The V-fender is the most commonly used moulded fender type and is available in 3 different cross sections, SV, SX and SH. The main difference is the width of the front face and resulting surface load. Each type can be equipped with an additional embedded steel plate in the fender head. This allows the installation of a low friction PE-rubbing plate, a steel fender panel or the mounting of the fender unit behind a pile construction. Are very robust, durable and require low maintenance Provide high shear resistance in the longitudinal direction Are most suitable for Multi-Purpose-Terminals Can be installed both vertically and horizontally Available in standard heights from 250 to 1.000 mm and standard length ranging from 1.000 to 3.500 mm (Special lengths, diameters, fixing arrangements or end-chamfers available upon request), each in 3 main different hardness grades. (Intermediate rubber grades are available upon request)  (5) UHMW-PE slinding plates and fenders are produced by a sintering process either from virgin or from reclaimed material (aprox. 70 % reclaimed +30 % virgin material - also named double-sintered or blended UHMW-PE). More than 90 % of all fender applications world- wide are using the reclaimed material. Due to its superior physical and mechanical properties, UHMW-PE (UltraHighMolecularWeight-PolyEthylene) combines highest strength with wear resistance and consequently provides the best durabilty of all available Polyethylene products. Advantages are: Very high impact strength Very low friction coefficient Very high abrasion resistance UV + Ozone resistant Non-conducting (optional) 100% recycable, non-rottening Standard colour: black, other colours available upon request