Product Description General Type SAP Large Flow Double Suction Horizontal Water Centrifugal Pump is single-stage double-suction centrifugal pump with horizontal split casing.It is widely used in fields of factories, cities, mines,power stations,farmlands,water conservancy and fire-fighting system for water supply & drainage.It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water.The temperature of the liquid is 0°c~80°c.Permissible maximum inlet pressure is 0.6MPa.
Performance range Capacity Q:72~20000m3/h Head H:6.8~186m Description of pump type For example 10SAP--6JA 10--The number obtained from the inlet diameter divided by 25(inlet diameter is 250mm) SAP--Single-stage double-suction centrifugal pumps with horizontally split casing. 6--The number obtained from the pump specific speed devided by 10. J--The rated speed is changed. A--Outer diameter of impeller is changed. Features of Type SAP Single Stage Double Suction Horizontal Split Case Centrifugal Water Pump 1.The rotor elements are propped up with two bearing points,so it is stable and low noise in operation. 2.Double-suction impeller itself can balance thrust. 3.The shaft with changeable sleeves is protected from wearing and has a long life. 4.When you dismantle the cover and put it to a secure place, the rotor elements will be removed for inspection. 5.It is necessary to dismantle the inlet piping and outlet piping while maintenance. 6.There are packing seal and mechanical seal in seal ways, customer may choose it according to the requirements. 7.Remained water in the inside of the pump can be completely drained,so the pump is njot damaged by frost in cold places. 8.The pump uses rolling bearings, so it runs for a long life.it is easy for maintenance. Complete provision range Pump,motor and coupling.Common bedplate will be supplied when inlet diameter is less than 200mm. Structure Chart
Company Information