Torch on SBS bitumen waterproof sheet materials for roofing

Torch on SBS bitumen waterproof sheet materials for roofing

Torch on SBS bitumen waterproof sheet materials for roofing is bitumen waterproof membrane. According the difference of application temperature, we have two kinds bitumen waterproof membrane. One is APP waterproof asphalt membrane, the other is SBS waterproof asphalt membrane. The SBS waterproof asphalt membrane is used in low temperature environment.

Torch on SBS bitumen waterproof sheet materials for roofing can be used -25℃, no craze. It is widely used for bathroom floor, roofing waterproof, basement, underground, swimming pool etc.

Specifications

1. Width: 5cm-1m or as customized

2. Length: 3m/5m/10m/15m/20m or as customized

3. Thickness: 2mm/3mm/4mm/5mm

4. Surface: PE film, Colorful Sand, Mineral Granules or Aluminium foil

Technical Parameters

Torch on SBS bitumen waterproof sheet materials for roofing

1. SBS modified bitumen waterproof membrane has good watertightness.

2. SBS modified bitumen waterproof membrane is high strength of extension, good ductility

3. SBS modified bitumen waterproof membrane is special used for low temperature.

4. SBS modified bitumen waterproof membrane is easy construction, can be constructed all of the year by the way of hot melt.

Torch on SBS bitumen waterproof sheet materials for roofing

Sand cover bitumen waterproof membrane

Aluminium foil bitumen waterproof membrane

PE film bitumen waterproof membrane

Application

1.Make sure the roof deck is smooth,clean and dry(Moisture<9%),then apply the surface of roof deck with a kind bitumen paint till dry.

2. There are two methods in application:

One way is by heating and melting method---Heat the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

The other way is by cold adhesive method---Pour the cold adhesive on the roof deck then roll the membrane to install it to be fully sticked to roof deck.

By heating and melting method and by cold adhesive can be used in alternation as requested.

3.After application,, a full serious inspection is required,that`s to make sure no air bubble,,no fold,,no falling away etc. and guarantee the waterproof life.

Requirements for construction

1.The base should be dry and clean. Do not work in the rainy or snowy day.

2.Do not work under heavy wind(above 5 grade)

3.Unsuitable for construction below 5°C

4.If it is rain or snow in the process of construction, protective measure to the laid membrane is must.

5.All the workers should put on special uniforms to keep safe when installing. There should be equipments for fire controls.

Packaging & Shipping

Standrad packing: Roll packing with pallets

Company Information: